Table of Contents

Advertisement

Quick Links

Operating manual
Clou Compact 2.0
www.austroflamm.com

Advertisement

Table of Contents
loading

Summary of Contents for Austroflamm Clou Compact 2.0

  • Page 1 Operating manual Clou Compact 2.0 www.austroflamm.com...
  • Page 2 Tel: +43 (0) 7249 / 46 443 www.austroflamm.com info@austroflamm.com Edited by: Olivera Stojanovic Illustrations: Konstruktion Text: Technical department (Austroflamm) Copyright All Rights reserved. The contents of these instructions may be reproduced or distributed only with the consent of the publisher! Printing, spelling and typographical errors reserved.
  • Page 3: Table Of Contents

    Operating manual Clou Compact 2.0 Contents Contents General information ............................Copyright.............................. Purpose of the manual ............................Storing the manual ..........................Structure of the manual........................Representations used.......................... Version control............................. Abbreviations ............................Safety ..................................Importance of the safety instructions ....................Warning of sources of danger ......................
  • Page 4 Contents Operating manual Clou Compact 2.0 9.2.3 Rearranging the flue pipe connection ....................28 9.2.4 Converting external air connection....................30 9.2.5 Installing Keramott..........................30 10 Settings................................. 31 10.1 Aligning the stove..........................31 10.2 Adjusting the door ..........................31 10.3 Adjusting the door lock ........................33 10.4...
  • Page 5: General Information

    Operating manual Clou Compact 2.0 1 | General information General information You have decided in favor of an Austroflamm stove. Congratulations on your decision and thank you for your trust. Correct operation and care are essential for trouble-free operation and long service life.
  • Page 6: Purpose Of The Manual

    2 | Purpose of the manual Operating manual Clou Compact 2.0 Purpose of the manual This manual is a component part of the stove and is intended to contribute to the stove being safely in- stalled and maintained. Please read this manual before using the stove for the first time.
  • Page 7: Abbreviations

    Operating manual Clou Compact 2.0 2 | Purpose of the manual Abbreviations Abbreviation Meaning Heat Memory System Stoves...
  • Page 8: Safety

    3 | Safety Operating manual Clou Compact 2.0 Safety In this manual we give you numerous safety instructions for the safe operation of your stove. These in- structions are characterized differently as follows, depending on their importance: Importance of the safety instructions NOTICE Particular behaviour and/or activities that are required for safe working.
  • Page 9: Special Types Of Danger And Personal Protective Equipment

    Operating manual Clou Compact 2.0 3 | Safety • Please note that the surfaces of this stove heat up considerably during operation. We recommend that you use the protective glove supplied to operate your stove. • Please alert children to these dangers, and keep them away from the stove when it is operating.
  • Page 10: Product Overview

    Operating manual Clou Compact 2.0 Product overview Intended use The Austroflamm stove described in this manual is manufactured and tested with a type A1 self-closing and locking door under EN test EN 13240. NOTICE Operation is only permissible with closed/bolted door.
  • Page 11 Operating manual Clou Compact 2.0 4 | Product overview Fig. 2: Safety distances 1) Open (+) and closed (-) (primary/secondary air control- ler) Fig. 3: Air control...
  • Page 12: Energy Label

    4 | Product overview Operating manual Clou Compact 2.0 Energy label -80% Austrof amm Clou Compact -60% -40% -20% ENERGIA · ЕНЕРГИЯ · ΕΝΕΡΓΕΙΑ · ENERGIJA · ENERGY · ENERGIE · ENERGI 2015/1186 Fig. 4: Energy label Positioning of the nameplates Here we show where you can find the nameplate.
  • Page 13: Technical Data

    Operating manual Clou Compact 2.0 5 | Technical data Technical data As a type 1 stove, a connection to a chimney already occupied with other solid-fuel stoves and ovens is possible provided that the chimney rating under DIN 4705 – part 3, does not contravene this.
  • Page 14 5 | Technical data Operating manual Clou Compact 2.0 Lignite briquettes Peat briquettes Briquettes made from a mixture of fossil fuels Other fossil fuels Briquettes made from a mixture of biomass and fossil fuels Other mixture of biomass and solid fuels (*) PM = dust, OGC = organic gaseous connections, CO = carbon monoxide, NOx = nitrogen oxide (**) Only required when using correction factors F(2) or F(3).
  • Page 15: General Specifications

    Operating manual Clou Compact 2.0 5 | Technical data Specification mg/m³ for heated filter method (in compliance with Annexe III, number 4, letter a, sec- tion i, point 1) or g/kg for measurement in dilution tunnel (in compliance with Annexe III, number 4, let- ter a, section i, point 2 and 3.)
  • Page 16: Transport, Handling And Storage

    6 | Transport, handling and storage Operating manual Clou Compact 2.0 Transport, handling and storage Transportation Immediately checked the goods delivered for complete- ness and damage in transit. Before installing the stove, check that all movable parts are working. Any defects before the installation of the stove must be reported.
  • Page 17: Requirements At The Installation Location

    When connecting the flue pipes to the chimney, national and/or local safety regulations must be com- plied with. Your Austroflamm stove is fitted at the factory with a flue pipe outlet at the top (diameter 150 mm). The connection can, as described in these instructions, be rearranged to the bottom. When connecting with other pipe diameters the approval of your responsible chimney sweep is required.
  • Page 18: Fuel Material/-Quantity

    8 | Fuel material/-quantity Operating manual Clou Compact 2.0 Fuel material/-quantity Fuel Wood Many of our native types of wood can, after being appropriately dried, be burnt CO2-neutral in heat- producing appliances. Wood stands out because it grows again, can be sustainably harvested, re- quires little or no extra external energy to be invested in the fuel, and has a short journey from the pro- ducer to the consumer, which provides an optimal climate balance.
  • Page 19 Operating manual Clou Compact 2.0 8 | Fuel material/-quantity Please observe at all times the maximum specified amount to be laid, even when putting on more wood! Otherwise your fire will not provide the desired efficiency - but above all considerable damage may be caused to your appliance, to gaskets and material and to the flue gas duct.
  • Page 20: Fuel Quantity

    Maximum amount of fuel to be deposited: 1.3 kg wood or briquettes. NOTICE Overheating Too great a quantity of fuel can lead to overheating and damage to your Austroflamm stove NOTICE To avoid damage you must NEVER operate your Stove a greater quantity of fuel than that specified in...
  • Page 21: Installation

    Operating manual Clou Compact 2.0 9 | Installation Installation Installation must only be carried out by an authorized specialist company. Before installing the stove, check that all movable parts are working. Any defects must be reported be- fore the installation.
  • Page 22 9 | Installation Operating manual Clou Compact 2.0 2) Loosen the two locking screws (M5/TX25) of the steel side cladding, right and left inside top. Fig. 9: Loosening the screws 3) Lift up and detach the side cladding. Fig. 10: Detaching the side cladding 4) Undo the screws from the top front cladding.
  • Page 23 Operating manual Clou Compact 2.0 9 | Installation 5) Open door. 6) Undo the screws from the bottom. Fig. 12: Undoing the screws 7) Remove cladding. Fig. 13: Removing the cladding 8) Open door. 9) Undo the screws from the bottom front cladding.
  • Page 24: Converting The Door Handle (Softlock)

    9 | Installation Operating manual Clou Compact 2.0 9.2.2 Converting the door handle (softlock) 1) To remove the cover and only the right side cladding, proceed as described in the section Removing the side cladding [}on page 21]. ð The front cladding at top and bottom does not need to removed for this step.
  • Page 25 Operating manual Clou Compact 2.0 9 | Installation 5) Remove door handle. Fig. 19: Removing the door handle 6) Detach wooden handle from original door handle (1). Fig. 20: Detaching the wooden handle 7) Mount the wooden handle on the new door handle with the original screws.
  • Page 26 9 | Installation Operating manual Clou Compact 2.0 8) Mount door handle in the original position. ð In doing so, use the screws from the old handle. Fig. 22: Mounting the door handle 9) Mount new catch in the original position.
  • Page 27 Operating manual Clou Compact 2.0 9 | Installation 11) Close door slowly. In the process, note whether the door latches correctly into the catch. Fig. 25: Slowly closing the door 12) Should the door not correctly engage the catch, the four screws can be used to adjust the catch upwards, downwards, forwards and backwards.
  • Page 28: Rearranging The Flue Pipe Connection

    9 | Installation Operating manual Clou Compact 2.0 9.2.3 Rearranging the flue pipe connection 1) First the cover must be removed and the side clad- ding detached. Proceed as described in the section Removing the side cladding [}on page 21].
  • Page 29 Operating manual Clou Compact 2.0 9 | Installation 5) Replace parts and reinstall. Fig. 31: Replacing cover and bracket Fig. 32: Cover and bracket replaced 6) Remount side cladding and attach cover. Fig. 33: Remounting the side cladding and attaching the cover...
  • Page 30: Converting External Air Connection

    9 | Installation Operating manual Clou Compact 2.0 9.2.4 Converting external air connection 1) To remove the cover and the side cladding, Proceed as described in the section Removing the side clad- ding. 2) Using a saw, remove the perforated cut-out to the side cladding (rear).
  • Page 31: Settings

    Operating manual Clou Compact 2.0 10 | Settings Settings 10.1 Aligning the stove 1) First the cover and the side cladding must be de- tached. ð Proceed , as described in the section Removing the side cladding [}on page 21].
  • Page 32 10 | Settings Operating manual Clou Compact 2.0 4) Undo screws and removing cladding. Fig. 39: removing upper front cladding 5) Undo the screws at the bottom and remove cladding. Fig. 40: removing lower front cladding...
  • Page 33: Adjusting The Door Lock

    Operating manual Clou Compact 2.0 10 | Settings 6) The door can be adjusted on the screws. 7) Using the screws (1) the door can be adjusted up, down, left and right. 8) Using the grub screws (2) the door can be adjusted in and out.
  • Page 34: Adjusting The Closing Pressure Of The Door

    10 | Settings Operating manual Clou Compact 2.0 10.4 Adjusting the closing pressure of the door Only the left side cladding needs to be removed for this step. 1) To remove the cover and the side cladding, Proceed as described in the section Removing the side clad- ding [}on page 21].
  • Page 35: Commissioning

    Operating manual Clou Compact 2.0 11 | Commissioning Commissioning 11.1 Initial Commissioning NOTICE During the initial commissioning and in the following 2-3 combustion cycles, only approx. 2/3 of the maximum fuel quantity is to be used. NOTICE To avoid damage you must NEVER operate your Stove a greater quantity of fuel than that specified in this manual! During the first 3-4 combustion cycles at nominal heat output, odors may develop.
  • Page 36: Operation

    12 | Operation Operating manual Clou Compact 2.0 Operation 12.1 Before heating up The stove can only function properly if there is sufficient combustion air coming to the room of installa- tion (the appliance), specially if several firing installations are being operated at the same time. Ensure sufficient air supply before heating up.
  • Page 37: Heating In The Transition Period

    Operating manual Clou Compact 2.0 12 | Operation 7) Close the door. ð It is best to allow the first layer of wood to combust without altering the air damper setting. ð If only the bed of embers is left (no more flames), you can place another layer of log.
  • Page 38: Maintenance

    13 | Maintenance Operating manual Clou Compact 2.0 Maintenance 13.1 Changing the seal on the door 1) Remove old seal from the door. 2) Glue in new seal with a suitable adhesive (e.g. silicon B310). Fig. 48: Changing the seal...
  • Page 39: Cleaning

    Operating manual Clou Compact 2.0 14 | Cleaning Cleaning 14.1 Cleaning the stove, flue gas ducts and flue pipe The stove, the flue gas ducts and flues should be annually - possible even more often, e.g. • after the chimney has been cleaned •...
  • Page 40: Cleaning The Door Window

    14.3 Cleaning the door window Spray window with glass cleaner and leave it for a moment to take effect. • We recommend cleaning the glass with our Austroflamm glass cleaner or a commercially available window cleaner. • Prevent door- or window seals from coming into contact with water or cleaner, since these will oth- erwise harden and in doing so lose their function.
  • Page 41: Cleaning Surfaces

    Operating manual Clou Compact 2.0 14 | Cleaning 14.4 Cleaning surfaces • Varnished surfaces may only be cleaned with a soft cloth (if necessary damp). • Soak up dissolved dirt with absorbent cloths or household paper. • For stainless steel surfaces there are also special cleaners.
  • Page 42: Help

    15 | Help Operating manual Clou Compact 2.0 Help Problem Cause Solution The glass window is sooty Insufficient draft from time to time (depending on use) the window must be cleaned with glass cleaner Clarification with chimney sweeper (poss extend chimney/measure...
  • Page 43: Firebox Lining

    Operating manual Clou Compact 2.0 15 | Help Problem Cause Solution Operating temperature not reached Bring stove to the operating temper- ature Sooting up of the window after 8- 10 hours of fires is normal Chimney draft too low Contact chimney sweep 15.1 Firebox lining...
  • Page 44: Accessories

    16 | Accessories Operating manual Clou Compact 2.0 Accessories Have defective parts (accessories, spare parts) replaced by your specialist stove dealer. This guaran- tees that stove is and remains safe and functional.
  • Page 45: Spare Parts

    Operating manual Clou Compact 2.0 17 | Spare parts Spare parts Keramott Item no. Quantity Item Item no. Keramott floor left 724051 Keramott floor rear 724052 Keramott panel left 724053 Keramott panel side 724054 Keramott panel rear 724055 Keramott floor right...
  • Page 46 17 | Spare parts Operating manual Clou Compact 2.0 Firebox door Item no. Quantity Item Item no. FB door 724121-29 O-seal Ø14x1450 714223 Seal D6x1262 CULIMETA 718183 Hinge pin 778931-92 Grub screw with hex and eyebolts M5x6 DIN916 718032-92 Handle mounted...
  • Page 47 Operating manual Clou Compact 2.0 17 | Spare parts Softlock Item no. Quantity Item Item no. Washer without chamfer for M5 DIN125 718062-15 Grub screw with hex and eyebolts M4x12 DIN916 718064-92 Grub screw with hex and eyebolts M4x6 DIN916 718459-92 Safety washer for shafts Ø4 DIN6799...
  • Page 48: Dismantling

    18 | Dismantling Operating manual Clou Compact 2.0 Dismantling For correct uninstallation and dismantling of the stove, contact your Austroflamm specialist dealer.
  • Page 49: Disposal

    NOTICE For correct uninstallation and dismantling of the stove, contact your Austroflamm specialist dealer. Electric and electronic components Remove the electric and electronic components from the appliance by dismounting them. These com- ponents must not be disposed of via non-recyclable waste.
  • Page 50 19 | Disposal Operating manual Clou Compact 2.0 Handles and decorative elements made of metal If present, disassemble or remove handles and decorative elements made of metal and dispose of as metal scrap. Local disposal options must be observed.
  • Page 51: Guarantee / Warranty

    For the replaceability of the warranty case the start-up log must be received by Austroflamm within one month at the latest of the initial commissioning. In or- der to make a claim on the warranty, repairs to your stove must only be carried out by a service en- gineer authorized by Austroflamm.
  • Page 52: Data Processing

    If you consent to the appropriate handling of your personal data for the following purposes, please tick this box. o I hereby agree that Austroflamm GmbH and AUSTROFLAMM Service GmbH & Co KG may send me service reminders and offers on other products from Austroflamm GmbH for the purposes of advert- ising via E-Mail/ SMS/ telephone.
  • Page 53: Start Up Log

    Operating manual Clou Compact 2.0 22 | Start up log Start up log Operator / Customer Dealer / Engineer Name Company Street Street Town and postal code Town and postal code Telephone Telephone Email Email Stove Working Comments Model Serial number...
  • Page 54: Service Report

    23 | Service Report Operating manual Clou Compact 2.0 Service Report Date Technicians Notes Work carried out, replacement parts installed...
  • Page 55 Operating manual Clou Compact 2.0 23 | Service Report Date Technicians Notes Work carried out, replacement parts installed...
  • Page 56 Notizen / notes / appunti / remarques...
  • Page 57 Notizen / notes / appunti / remarques...
  • Page 58 Vollständigkeit / completeness / completo / complet Geprüft von / checked by / controlled da / contrôlé par ____________________________________________________ Datum / date / data / date ____________________________________________________ AUSTROFLAMM GMBH Austroflamm-Platz 1 A- 4631 Krenglbach Tel: +43 (0) 7249 / 46 443 www.austroflamm.com...

Table of Contents