OJ Electronics Microline OTN-1991-RU Series Instructions

I N STRU CT I ONS
Type OJ Microline OTN
67103 - 06/11 (MBC)
English
OJ Microline,
OJ MICROLINE PRODUKTPROGRAM
CE MARKING
Standards applied
The product may only be energised when the
entire installation meets the current directive
requirements.
If the product has been exposed to damage e.g.
in transport, it must be checked and overhauled
by qualified staff before the product is
connected to the power.
TECHNICAL DATA
CLASSIFICATION
WARNING – Important Safety Instructions
Mounting of sensor
Floor sensor:
PLACEMENT OF THERMOSTAT WITH BUILT-
IN SENSOR
OJ Microline units contain a fault interrupter
circuit which interrupts the heating in case of
disconnected or short-circuited sensors.
MOUNTING OF THERMOSTAT (fig. 1-3)
SETBACK TEMPERATURE
TEMPERATURE SETTING
THERMOSTAT ADJUSTMENT
© 2011 OJ Electronics A/S
MAX./MIN. TEMPERATURE
FIGURS
Русский
Комплектация термостата ОJ MICROLINE
Маркировка СЕ
Примененные стандарты
1