01/04/28 16:42:06 3CHN5620_131
2.
Remove the inspection hole plug (Fig.
lining thickness ( ) on both front wheels.
Lining Thickness:
Standard:
Service Limit:
If either lining is worn beyond the limit, both brake shoes must be
replaced by an authorized Honda dealer.
3.
If the brake lever free play and the brake shoe lining thicknesses
are within the recommended limits, reinstall the inspection hole
plugs, seating them into the inspection holes as shown in Fig.
4.
If the brake lever free play is excessive but the linings are not worn
beyond the service limit, adjust the brake lining clearance.
(4)
(1)
Fig. 4-25
(1) Inspection hole plug
(2) Lining thickness
While reading this manual, remember:
126
2
4.0 mm (0.16 in)
1.0 mm (0.04 in)
(3)
Indicates a strong possibility that serious injury or
death may result if instructions are not followed.
4-25
) and measure the
(2)
(1)
(3) Front brake drum
(4) Front wheel rim
4-25
.