Table of Contents
Advertisement
01/04/28 16:38:49 3CHN5620_105
3.
Remove the screws ( ) (Fig.
assembly ( ) from the air cleaner housing.
4.
Unscrew the clamp ( ).
5.
Remove the air cleaner ( ) from the air cleaner body ( ).
(2)
Fig. 4-5
(1) Screw
(2) Air cleaner assembly
6.
Gently wash the air cleaner in clean, non-flammable (high flash
point) solvent such as kerosene not gasoline.
Allow the air cleaner to dry throughly before applying oil. A wet air
cleaner will not fully absorb the oil.
POTENTIAL HAZARD
Using petrol or low flash point solvents for cleaning ATV parts.
WHAT CAN HAPPEN
A fire or explosion could result.
HOW TO AVOID THE HAZARD
Use only a nonflammable or high flash point solvent to clean ATV
parts.
100
1
4-5
2
3
4
(1)
−
) and remove the air cleaner
5
(5)
(3)
(3) Clamp
(4) Air cleaner
(5) Air cleaner body
(4)
Advertisement
Table of Contents
