Sylvania SDPF1092-B User Manual page 9

Replace the Remote Control Battery
1. Hold the remote control with the buttons facing
down.
2. Push and hold the small release tab while pulling
the battery tray out.
3. Replace the "CR2025" Lithium battery on the
tray with the positive (+) side facing up.
4. Push the tray back in until it clicks into place.
Note:
• To use the remote control, point it towards the remote sensor in the front of
the frame, within a range of five (5) meters from the DPF at an angle of up
to 30 degree.
• The remote control will not operate if its path is blocked.
• If the remote control will not be used for a long period of time, take out the
batteries and place the remote control in a cool and dry place.
Button cell batteries can cause
serous injury or death if swallowed.
Dispose of safely! Store batteries
out of reach of children!
5