Table of Contents
Advertisement
Audio Section
Stereo Mode
Continuous Average Power (FTC)
70 Watts per channel 20Hz–20kHz:
@ < 0.07% THD, both channels driven into 8 Ohms
Five-Channel Surround Mode
Power Per Individual Channel
Front L&R channels:
65 Watts per channel,
@ 0.07% THD, 20Hz–20kHz into 8 ohms
Center channel:
65 Watts, 20Hz–20kHz into 8 ohms
Surround channels:
65 Watts per channel, 40Hz–20kHz into 8 ohms
Input Sensitivity/Impedance
Linear
Signal-to-Noise Ratio (IHF-A)
Linear
Surround System Adjacent Channel Separation
Analog Decoding (Pro Logic, etc.) 40dB
Dolby Digital (AC-3)
Frequency Response
@ 1W (+0, –3dB)
High Instantaneous
Current Capability (HCC)
Transient Intermodulation
Distortion (TIM)
Rise Time
Slew Rate
Technical Specifications
220mV/50 Kohms
95dB
55dB
7Hz–80kHz
±65 amps
Unmeasurable
16 µsec
40 V/µsec
33
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Selectivity
Image Rejection
Tuner Output Level
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity
Video Section
Television Format
Input Level/Impedance
Output Level/Impedance
Video Frequency Response 10Hz to 8MHz (-3dB)
S/N
General
Power Requirement
Power Consumption
Dimension (Max)
Width
Height
Depth
Weight
Depth measurement includes knobs, buttons and terminal connections.
All features and specifications are subject to change without notice.
*Trademarks of Dolby Laboratories.
†
DTS is a trademark of Digital Theater Systems.
††
UltraStereo is a trademark of UltraStereo Corp.
87.5–108.0 MHz
IHF 1.3 µV/13.5dBf
Mono/Stereo 76/68dB
Mono/Stereo 0.2/0.5%
1kHz 40dB
±400kHz 65dB
98MHz 50dB
1kHz, ±75kHz Dev 800mV
520–1710kHz
50dB
Loop 500µV
1kHz, 30% Mod 0.5%
±20kHz 70dB
NTSC
1Vp-p/75ohms
1Vp-p/75ohms
65dB
AC 120V 60Hz
80W idle, 325W maximum
(2 channels driven)
17.4 inches (440 mm)
6.3 inches (160 mm)
18.0 inches (459 mm)
32.6 lbs. (14.8 kg)
Hide quick links:
Advertisement
Table of Contents
