Scan Camera; Temperature - Motorola VM44 CONNECT User Manual

Press the + UP button or - DOWN button to select
3.
press the OK button to confirm.
4. Camera
- DOWN button to select the desired Camera, and press the OK
button.
Press the + UP button or - DOWN button to select
5.
OK button to delete that registration.
NOTE
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.6.4

Scan camera

This function is only available when you have more than 1 Baby Unit
(Camera).
1. Press the button and the menu bar will pop up.
Press the < LEFT button or > RIGHT button until
2.
highlighted, and the
Press the + UP button or - DOWN button to select
3.
the OK button to confirm.
4. The screen will then display images from different registered
cameras in a loop of Camera
every 12 seconds.
TIP:
You can also press the OK button repeatedly to select the available camera
options from
4.7

Temperature

1. Press the button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until
highlighted.
Press OK button, then +UP / -DOWN to select °C or °F.
3.
Parent Unit Menu Options
/ / /
del/
/ / / ,
will pop up, press the + UP button or
add/ view/
/ / /
scan.
del, and
, then press the
is
scan menu will pop up.
scan, and press
, changing about
is
17