Scan Camera; Temperature; Power Saving Mode - Motorola VM35 User Manual

4.6.4 Scan camera

This function is only available when you have more than 1 Baby
Unit (Camera).
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
highlighted, and the
pop up.
3. Press the + UP button or - DOWN button to select
and press the O button to confirm.
4. The screen will then display images from different registered
cameras in a loop of Camera
every 12 seconds.
TIP
You can also press the O button repeatedly to select the avail-
able camera options from
4.7

Temperature

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
highlighted.
3. Press O, then +UP / -DOWN to select °C or °F.
4.8

Power Saving mode

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until V is
highlighted.
3. Press the + UP button or - DOWN button to select auto video
off after 5 mins, 30 mins or 60 mins (if operating on batteries
only)..
NOTE
The audio will remain and you can press any key to switch the
video back on.
Parent Unit Menu Options
del/ add/
/ /
/ / /
is
view/ scan menu will
/ , changing about
, scan.
is
scan,
17