Table of Contents
Advertisement
Thermal Considerations
Electronic components in the EM3080 V2 will generate heat during the course of their operation. Operating the EM3080 V2
in continuous mode for an extended period may cause temperatures to rise on CPU, CIS, LEDs, DC/DC, etc. Overheating
can degrade image quality and affect scanning performance. Given that, the following precautions should be taken into
consideration when integrating the EM3080 V2.
Avoid continuous use of the LED for prolonged periods.
Reserve sufficient space for good air circulation in the design.
Avoid wrapping the EM3080 V2 with thermal insulation materials such as rubber.
External Optical Elements
Do not subject external optical components on the engine to any external force. Do not hold the engine by an external
optical component, which may cause the mechanical joints that secure the components to crack or break due to excessive
stress.
Installation Orientation
The Figure 2-1 illustrates a front view of the EM3080 V2 after correct installation.
Mounting (Unit: mm)
The illustrations below show the mechanical mounting dimensions for the EM3080 V2. The structural design should leave
some space between components and reserve sufficient room for the installation of the FFC cable.
Figure 2-1
6
Advertisement
Table of Contents
