Establishing Communication - Victron energy BlueSolar SCC010005000 Manual

Establishing communication with one controller only
6.
6.1 Click the menu "Communication (C)" in the menu bar of the screen shown in section 5.3.
The dialog box "Serial Port Setting" will appear.
Enter the correct Port number (see section 3.3) and the correct Baud rate (115200).
The Port number must appear under "Configuration" on the right hand side of the dialog box.
If needed, click on "Device Manager" to set the correct Data Bits, Stop Bits and Parity.
Press "Add".
Press "Update" and close the dialog box.