Parameter
Debug control unit
interface
(trace control block)
ROM emulation function
Break function
Pin mask function
Connector for mounting
target system
(recommended)
Operating environment
Storage environment
12
CHAPTER 1 OVERVIEW
Table 1-1. Function Specifications (2/2)
• Trace memory full
Trace end
• Trace end status of debug control unit detected
• 3 types
Trace mode
<1> Trace from trace event to trace end
<2> Trace around match event (delay trace)
<3> Trace termination by trace event (incorporated in debug control unit)
2 MB × 2 banks (access time: 60 ns (min.))
ROM emulation
memory capacity
• 4 /8/16 Mb ROM
Supported ROM
• 3 V/5 V
• 16-bit bus mode only
• Page access supported
• Up to 2 probes connectable (sold separately)
ROM probe
• 40-pin/42-pin DIP package type
Incorporated in debug control unit of target device
Incorporated in debug control unit of target device
• 26-pin straight type:
8830E-026-170S (by KEL Corporation)
• 26-pin right-angle type: 8830E-026-170L (by KEL Corporation)
Temperature
10 to 40°C
Humidity
10 to 80%RH (no condensation)
−15 to +40°C
Temperature
Humidity
10 to 80%RH (no condensation)
User's Manual U16348EJ1V0UM
Specification
Delay counter: Any value between 0 and 32 K counts specifiable
(1 count equals 24 bytes of trace memory)