Hyundai stargazer 2022 Owner's Manual page 277

Driver assistance system
WARNING
Take the following precautions when
using Blind-Spot Collision-Avoidance
Assist:
• For your safety, only change the Set-
tings after parking the vehicle at a
safe location.
• If any other system's warning mes-
sage is displayed or audible warn-
ing is generated,Blind-Spot Col-
lision-Avoidance
message may not be displayed and
audible warning may not be generat-
ed.
• You may not hear the warning sound
of Blind-Spot Collision-Avoidance As-
sist if the surrounding is noisy.
• Blind-Spot Collision-Avoidance Assist
may not operate if the driver applies
the brake pedal to avoid collision.
• When Blind-Spot Collision-Avoidance
Assist is operating, braking control by
the function will automatically cancel
when the driver excessively depress-
es the accelerator pedal or sharply
steers the vehicle.
• During Blind-Spot Collision-Avoid-
ance Assist operation, the vehicle
may stop suddenly injuring passen-
gers and shifting loose objects. Al-
ways have the seat belt on and keep
loose objects secured.
• Even if there is a problem with Blind-
Spot Collision-Avoidance Assist, the
vehicle's basic braking performance
will operate normally.
• Blind-Spot Collision-Avoidance Assist
does not operate in every situations
or cannot avoid every collisions.
7-26
Assist warning
• Blind-Spot Collision-Avoidance As-
sist may warn the driver late or may
not warn the driver depending on the
road and driving conditions.
• Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Collision-Avoidance As-
sist. Maintain a safe braking distance,
and if necessary, depress the brake
pedal to reduce driving speed or to
stop the vehicle.
• Never deliberately operate Blind-
Spot Collision-Avoidance Assist on
people, animal, objects, etc. It may
cause serious injury or death.
WARNING
The brake control may not operate prop-
erly depending on the status of ESC
(Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function