Table of Contents
Advertisement
DRY IRONING
If you are going to be dry ironing only, there is no need to fill the water tank. If you're going to
be dry ironing for 20 minutes or more, empty the reservoir first, to avoid spontaneous bursts of
steam.
•
Move the steam control to
•
Select the required temperature.
•
When the smart status light flashes green, then start ironing.
VERTICAL STEAM
Vertical steaming removes wrinkles from hanging clothes, hanging
curtains, and furnishing fabrics.
•
Check that there is water in the tank.
•
Set the temperature control to max. Set the steam control to
•
Check that there is nothing behind the fabric that may be
damaged by the steam or heat.
•
Check that pockets, turn-ups, and cuffs are empty.
•
Hold the iron, with the soleplate vertical, close to (but not
touching) the fabric.
•
Press the
burst of steam button. You may have to press it 2 or
3 times to pump water through the system.
•
Leave 4 seconds between bursts, to let the temperature build up.
AFTER USE
•
Unplug the stand.
•
Lift the cover of the water inlet to open it.
•
Hold the iron over a sink, turn it upside down, and drain the
water from the tank.
CAUTION: The water may be hot.
•
Sit the iron on the stand.
•
Leave it to cool down completely.
•
When it is cold, wipe off any moisture, and close the water
inlet cover.
•
Store the iron on its heel, to avoid corrosion and damage to
the soleplate.
no steam.
6
.
Advertisement
Table of Contents
