Advertisement
Quick Links
ASSEMBLY RATING
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
EASY
Assembly Instructions
CM7449CK/EK
DIFFICULT
Page 1 of 5
Tools Required for Assembly:
Allen Wrench
Phillips Screwdriver
2 PERSONS RECOMMENDED
(Included)
(not Included)
Rev.14-10-24
Advertisement
Related Manuals for Furniture of America Pioneer CM7449CK
Summary of Contents for Furniture of America Pioneer CM7449CK
- Page 1 Assembly Instructions CM7449CK/EK ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench (Included) assembling a specific product (with 1 being easy and 5 being difficult). For some Phillips Screwdriver products, two persons are recommended.
- Page 2 Page 2 of 5...
- Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 8 pcs Headboard Bolt 1/4”x2” #B x 8 pcs #2 x 1 pc Lock Washer Footboard...
- Page 4 Align the 2 headboard legs (#4) with the pre-drilled holes of the headboard (#1). Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt (#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order. III.
- Page 5 Align the threaded end of the 2 slat support legs (#6) with the pre-drilled holes on the slat (#5) and tighten by hand until secured. Repeat the process above to assemble the remaining 6 slat support legs (#6) onto the 3 remaining slats (#5). Adjust the levelers according to the ground level on Step 4.
- Page 6 Assembly Instructions CM7449Q ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench (Included) assembling a specific product (with 1 being easy and 5 being difficult). For some Phillips Screwdriver products, two persons are recommended.
- Page 7 Page 2 of 5...
- Page 8 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 8 pcs Headboard Bolt 1/4”x2” #B x 8 pcs #2 x 1 pc Lock Washer Footboard...
- Page 9 Align the 2 headboard legs (#4) with the pre-drilled holes of the headboard (#1). Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt (#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order. III.
- Page 10 Align the threaded end of the slat support leg (#6) with the pre-drilled hole on the slat (#5) and tighten by hand until secured. Repeat the process above to assemble the remaining 2 slat support legs (#6) onto the remaining 2 slats (#5). Adjust the levelers according to the ground level on Step 4.
Need help?
Do you have a question about the Pioneer CM7449CK and is the answer not in the manual?
Questions and answers