Related Manuals for KESNOS PD09D
Summary of Contents for KESNOS PD09D
- Page 1 Home Dehumidifier Please read the manual carefully before using the unit PD09D USER MANUAL www.kesnos.com...
- Page 2 The dehumidifiers from Kesnos provide quick and efficient operation to reduce room's humidity and bring you a healthy and comfortable life. TO ACCESS CUSTOMER SUPPORT FASTER If there is any problem of the product, please contact Kesnos Customer Service at support@kesnos.com with your Purchase Order ID to help you address the problem more effectively.
- Page 3 BEFORE FIRST USE:...
-
Page 4: Table Of Contents
TABLE OF CONTENTS Safety Instructions ..............Parts Description .................. Control Interface..................Operation Instructions................Cleaning & Maintenance................ Troubleshooting..................Special Notes ..................Technical Parameters................& Warranty Contact Us................The graphics and functions provided in this manual may not be the same as the actual product. -
Page 5: Safety Instructions
Warning If water enters the dehumidifier, please turn the dehumidifier off and disconnect the power, contact Kesnos Customer Service at support@Kesnos.com in order to avoid a hazard. - Page 6 SAFETY INSTRUCTIONS 30%RH-90%RH. When using dehumidifier, other objects surrounding the machine at least need to be kept a distance of 7.9 inches (20cm), as shown in the picture on the right: - 2 -...
-
Page 7: Parts Description
PARTS DESCRIPTION Front Rear Continuous Drainage Port - 3 -... -
Page 8: Control Interface
1.Control Panel - 4 -... -
Page 9: Operation Instructions
OPERATION INSTRUCTIONS When powered on, The humidity level can be set within a range of 30%RH to 80%RH in 5% increments. ● When it starts to work, it will first automatically detect and show the room's humidity. In dehumidification mode (other modes are invalid), press the" Dehumidify" button, you can change the humidity selection. - Page 10 OPERATION INSTRUCTIONS LOCK (2S) Speed Button Power Off Memory Function Overflow Protection - 6 -...
- Page 11 OPERATION INSTRUCTIONS - 7 -...
- Page 12 OPERATION INSTRUCTIONS - 8 -...
- Page 13 OPERATION INSTRUCTIONS 5. Fault & Processing Methods - 9 -...
- Page 14 OPERATION INSTRUCTIONS 6. Empty the Water Tank Use the Water Tank Ways to Empty the Water Tank Full Tank Continuous Drainage Port - 10 -...
- Page 15 OPERATION INSTRUCTIONS - 11 -...
- Page 16 OPERATION INSTRUCTIONS 7.Continuous Drainage Remove the power supply, take out the water tank, open the drainage cap, and remove the rubber plug, then insert the water hose into the continuous drainage port and put back the water tank. Connect the power supply to start the operation.
-
Page 17: Cleaning & Maintenance
WARNING: A-Cleaning the dehumidifier body B-Cleaning filter C-Dehumidifier storage - 13 -... -
Page 18: Troubleshooting
Service ls the Full Tank indicator blinking? (The tank is full or in a wrong position. ) This product does not apply to over hot or cold environment, the machine will automatically enter the protection mode. It is a normal phenomenon. When running under lower ambient temperature, the machine will automatically... - Page 19 This is to prevent the frequent start of the machine. Does the machine stop working just now? The dehumidifier is designed to work in the humidity range of 30%-80%. Above or below this range, it will not work. Room temperature is too low, Please wait until the or below 41℉...
- Page 20 If the dehumidifier is still not working properly as expected and the troubleshooting steps or solutions above may not resolve the issue. Please unplug the power and shut down the dehumidifier, then contact Kesnos Customer Service at support@kesnos.com - 16 -...
-
Page 21: Special Notes
SPECIAL NOTES Do not insert thin rods and hard objects into the machine body to avoid malfunction and danger. When cleaning the Please clean the filter every dehumidifier, please use the two weeks (do not use hot wet textile to wipe gently, do water above 104°F, alcohol, not shoot the water directly. -
Page 22: Technical Parameters
TECHNICAL PARAMETERS MODEL PD09D POWER SOURCE 120V～60Hz RATED POWER (95°F,90%RH) 230W RATED CURRENT (95°F,90%RH) 2.0A MOISTURE REMOVAL (65°F,60%RH) 9.0 Pints/Day (4.25L/Day) MOISTURE REMOVAL (80 ℉,60%RH) 14 Pints/Day (6.6L/Day) MOISTURE REMOVAL (86 ℉,80%RH) 25 Pints/Day (12L/Day) MOISTURE REMOVAL (95 ℉,90%RH) 34 Pints/Day (16L/Day) INPUT POWER (65°F,60%RH) -
Page 23: Warranty & Contact Us
Warranty Kesnos offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occured, including those newly purchased and unused, from Kesnos or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Period. - Page 24 We are expecting to see our products fulfill your life and hear your voice. Your satisfaction means a lot to us. Please tag us if you share a snap on your social media. www.kesnos.com...
Need help?
Do you have a question about the PD09D and is the answer not in the manual?
Questions and answers