1. Insert new vent end cap.
3. Insert vent tube assembly.
5. Place two piece sleeve.
We reserve the right to modify product specifications without prior notice.
We reserve the right to modify product specifications without prior notice.
2. Torque vent end cap to 35 Nm.
4. Tighten up keeping vent tube aligned
with handle.
6. Insert and tighten screws.
7. DONE!
5
Servicing
Assembly
21mm
19mm
3mm
FV103-INS-03 2822 © Oasis Engineering Limited
FV103-INS-03 2822 © Oasis Engineering Limited