Harman Kardon Guide+Play GPS-810 User Manual page 32

Install the Mounting Bracket
F W
OR INDSHIELD
1. Hold the mounting
bracket's base against
the windshield.
2. Push the mounting
bracket lever towards
the base to lock the
bracket to the wind-
shield.
F D
OR ASHBOARD
1. Clean the dashboard
mounting location
with the supplied
alcohol pad.
2. Peel the mounting
base adhesive cover-
ing.
3. Attach the mounting
base to the mount-
ing location.
4. Hold the mounting
bracket's base against
the mounting base.
5. Push the mounting
bracket lever towards
the base to lock the
bracket to the dash-
board.
A
T TACHING THE
GPS-910/GPS-810
B
THE RACKET
1. Fit the bottom mounting
slot into the bracket cradle.
2. Snap the rear mounting slot
into the bracket cradle.
Make sure that the unit is
securely connected to the
bracket so it will receive
power from the car charger.
To unlock and remove the
unit, press the lever on the
botton of the cradle up.
g u d i e
+ l p y a
-M :
OUNTING
-M :
OUNTING
5. Push Lever
Towards Base
to Lock
3. Attach Mounting
Base to Dashboard
TO
GPS-910/810
™
2. Push Lever
Towards Base
to Lock
4. Attach Bracket
1. Clean Mounting
Location on
Dashboard
2. Snap Rear
Mounting Slots
Into Cradle
1. Fit Bottom
Mounting Slot
Into Cradle
1. Hold Base
Against
Windshield
to Mounting Base
2. Peel Covering
From Mounting
Base Adhesive