Dolby Digital Or Dts Decoder - Harman Kardon DVD 5 Owner's Manual

Setup and Connections
Connecting to a receiver/amplifier with Dolby Digital (AC-3) or DTS (Digital Theater Systems) decoder
When DVD´s encoded in Dolby Digital or DTS are
played, the Dolby Digital or DTS bitstream is out-
put from the player's OPTICAL or COAXIAL digi-
tal audio output. When the player is connected
to a Dolby Digital or DTS decoder, you can enjoy
theater-quality audio in your home. An optical
digital audio cable or coaxial audio cable (both
DVD5
To coaxial audio input connector
To optical audio input connector
Front Speaker (Left/Right)
12 SETUP AND CONNECTIONS
optional) is required for these connections, as
shown below.
I Note: With multiple video sources, your
Audio/Video device can be used for selecting
the video signal and routing it to the TV.
Connect the video or S-video output of the
DVD5 (whatever is provided with your device)
TV
To S-Video input connector
To audio input connector
(Red/White)
To Video input
connector (Yellow)

Dolby digital or DTS decoder

Center Speaker
to the video or S-video input on your device
and the video/S-video output of this device to
your TV. For more details, see the manual of
your Audio/Video amplifier/receiver.
2
Surround Speaker (Left/Right)
To power outlet
(AC 230V/50 Hz)
INPUT
Subwoofer