Nature's Generator Powerhouse Power Pod User Manual page 17

4. Insert Power Panel Cable plug into Solar Input port on the front of your Nature's Generator
Powerhouse Power Pod. You will know it is recharging when the ba�ery level LEDs are running,
solar panel icon is illuminated, and ba�ery bar starts running. The ba�ery bar will stop running when
the ba�ery is full or there is not enough power from Nature's Generator Powerhouse Power Panels.
5. It usually takes about 8 to 15 hours to recharge the Nature's Generator Powerhouse Power Pod if
using two Nature's Generator Powerhouse Power Panels. The recharging �me, of course, also
depends on the temperature and the strength of the sunlight.
6. To increase the recharging speed, you can connect the two serial connected Nature's
Generator Powerhouse Power Panels in parallel connec�on. The Solar Input port can handle
up to 2000 wa�s of solar power. Visit Naturesgenerator.com for more informa�on about
Nature's Generator Powerhouse Power Panels.
Nega�ve -
MC4 Connectors
Nature's Generator
Powerhouse Power Panel
15
Posi�ve +
Nature's Generator
Powerhouse Power Panel
Posi�ve +
Nature's Generator
Powerhouse Branch Cables
Visit Naturesgenerator.com for More Information
Posi�ve +
Nega�ve -
Nature's Generator
Powerhouse Power Panel
Nature's Generator
Power Panel Cable
Posi�ve +
Nega�ve -
MC4 Connectors
Nature's Generator
Powerhouse Power Panel
Nature's Generator
Powerhouse Power Pod
Nega�ve -