Step 7
Slot the Back Panel (P7) into the grooves of panels (P3, P4 & P5) as shown.
Step 8
You will need
4 x Cam Nuts
Phillips Head
(H5)
Screwdriver
Insert 4 x Cam Nuts into Left Side Panel (P3) and Right Side Panel (P4).
Attach the Top Panel (P1) to the Left Side Panel (P3) and Right Side Panel (P4) by aligning the
Dowels (H7) and Cam Bolts (H6) to the holes as shown.
Ensure that the Back Panel (P7) is slotted into the groove of the Top Panel (P1) as well.
Tighten the Cam Nuts (H5) with the Phillips Head Screwdriver in the Left Side Panel (P3) and
Right Side Panel (P4) to lock into position.
fantasticfurniture.com.au
Raw side facing inside
(P7)
(P3)
(P5)
(P1)
(P3)
(P4)
(H5)
(P4)
Page 8