Hanns.G JW197DPB User Manual page 16

User's Manual
H-POSITION
V-POSITION
CLOCK
PHASE
SHARPNESS
HDMI MODE
OSD SETTING
LANGUAGE
H-POSITION
V-POSITION
TRANSPARENCY
OSD TIME-OUT
OSD COLOR
SYSTEM
AUDIO INPUT
Select the 「H-POSITION」 option to shift the screen image to the
left or right. Enter the option and adjust the level.
only]
Select the 「V-POSITION」 option to shift the screen image up or
down. Enter the option and adjust the level.
Select the 「CLOCK」option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「PHASE」option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from -2 to 2.
Transferring audio-video image by HDMI port would
cause edges of the image being cut on the screen; select「PC
Mode」to display in full screen. Enter the option and select
「VIDEO Mode」(VIDEO) or 「PC Mode」(PC).
Input only]
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language.
the OSD Language depends on the selected model]
Select 「H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
Select 「TRANSPARENCY」 option to adjust the transparency of
the OSD. Enter the option and adjust the level.
Select 「OSD TIME-OUT」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
To choose the color combination of the OSD window, select
「OSD COLOR」 option under 「OSD SETTING」 menu, choose
modes 1/2/3.
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
16
[For VGA
[For VGA only]
[For HDMI
[Reference only,