Yale MPB040E Manual page 72

Battery Charger (Accusense
1. USB PORT (FACTORY USE ONLY)
2. MODE KEY IN MODE PORT
Figure 33. Mode Port, Lift Trucks Manufactured
Before May, 2013
For lift trucks manufactured after May, 2013, the
mode key has been replaced with a dip switch. See
Switch Position Mode Chart for correct switch posi-
tion. Removing the Charging Mode Label voids war-
ranty. Contact Service Engineering to set charging
mode for replacement batteries. See Figure 34.
Mfg Part
US - US1800
BatteryLead
AGM2224
Acid
Batteries
48
®
20A)
Table 8. Battery Chart for Accusense 20A Chargers Only
Voltage
24
24
1. USB PORT (FACTORY USE ONLY)
2. DIP SWITCHES IN MODE PORT
Figure 34. Mode Port, Lift Trucks Manufactured
A USB port located to the left of the mode port is for
factory use only.
For lift trucks manufactured before May, 2013, refer to
Table 8 to determine which mode should be used to
charge a particular battery.
Capacity Application
20HR/
RC@25A
(AmpHrs)
208 Deep Cycle
224 Deep Cycle
2200 YRM 1007
After May, 2013
Batt Type Accusense
20A Mode
HV Flooded
Absorbent Glass
Mat
2
4