Table of Contents
Advertisement
6 - 18
6
Open Source Licensing
This product uses a number of open source software packages which are listed below. The open
source software is provided free of charge. You are entitled to use the open source software in
accordance with the respective license conditions as provided in the following chapters.
6.1
Disclaimer
The open source software is distributed WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The respective
licenses may contain more details
6.2
How to obtain the source code
The software included in this product contains copyrighted software that is licensed under the GPL
and other open source licenses. Copies of those licenses are found below. You may obtain the
complete Corresponding Source code from us:
Open Source Compliance Division
Janz Tec AG
Im Doerener Feld 8
D-33100 Paderborn
Email: opensource@janztec.com
This offer is valid to anyone in receipt of this information.
6.3
Software packages
The software contained in this product makes use of the following open source software packages.
Package
u-boot
The u-boot software is stored in the SPI flash of the emWEB-10WTand is required to boot software
that is stored on the CFast, SD card or the internal eMMC.
As the u-boot can be replaced by the skilled end user, we have no control of which version of u-boot is
installed on which device. You can check the u-boot version by checking the u-boot start up
messages. Please indicate this version when you request the source code.
This license Agreement does NOT cover any software that is installed on the CFast, SD card or the
internal eMMC.
© Janz Tec AG
emWEB-10WT (Hardware and Software Manual) • Open Source Licensing
License
BSD-2-Clause
BSD-3-Clause
eCos-2.0
GPL-2.0
IBM-pibs
LGPL-2.0
LGPL-2.1
Rev. 1.1
Advertisement
Table of Contents
