Table of Contents

Advertisement

Quick Links

TwinLock B600 CashProtect

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TwinLock B600 CashProtect and is the answer not in the manual?

Questions and answers

Summary of Contents for INSYS TwinLock B600 CashProtect

  • Page 1 TwinLock B600 CashProtect...
  • Page 2 The use of a trademark not shown below is not an indication that it is freely available for use. Windows® is a registered trademark of Microsoft Corporation. INSYS locks® is a registered trademark of INSYS MICROELECTRONICS GmbH. Publisher INSYS MICROELECTRONICS GmbH Hermann-Köhl-Str.
  • Page 3 TwinLock B600 CashProtect Accreditations Accreditations EN 1300 / VdS 2396 M114307 High Security Lock Class EN B / 2 (TwinLock B) G106016 Blocking Device - Class C G105133 Ancillary Control Equipment (ACE) - Class C G108061 Hold-Up Detector – Class C G108062 Hold-Up Detector –...
  • Page 4: Table Of Contents

    2.4.1 Qualifications ..................12 2.4.2 Definition of ‘Skilled Electrician’ ............12 Protection of the Environment ............12 System Description ................13 TwinLock B600 CashProtect ............13 3.1.1 System Diagrams ................. 14 3.1.2 Operating Unit QPad ................16 3.1.3 Lock INSYS Lock 700 ................16 3.1.4...
  • Page 5 TwinLock B600 CashProtect Table of Contents 4.9.1 Types and Numbers of PIN Codes in Every Lock ........34 4.9.2 Entering PIN Code ................35 4.9.3 Entering PIN Code with Menu Keys ............. 35 4.9.4 Entering PIN Code with Numeric Keys ..........35 4.10...
  • Page 6 TwinLock B600 CashProtect Table of Contents 4.16.5 Locking the System despite Defect Bolt Work Contact ......67 4.16.6 Licensing ....................68 4.16.7 Performing a Restart ................68 4.17 Import / Export .................. 69 4.17.1 Importing Configuration and Language ..........69 4.17.2...
  • Page 7: General Information On This Manual

    Content and Usage This manual contains information on operation, configuration and maintenance of the electronic high-security lock system TwinLock B600 CashProtect. There is a separate manual for other versions of system TwinLock CashProtect. The manual describes the procedures of the systems approved to comply with VdS- class 2 standard and also informs about the system settings.
  • Page 8: Text Marks And Formatting

    TwinLock B600 CashProtect General Information on This Manual Text Marks and Formatting 1.3.1 Safety Warnings Danger Imminent mortal danger / Danger of severe injuries / health hazard. Consequences which might arise from not being aware of the danger. Instructions on how to avoid the danger or remove its cause...
  • Page 9: Icons And Their Meaning

    TwinLock B600 CashProtect General Information on This Manual 1.3.2 Icons and their Meaning Use the operating unit. After some seconds without user input, the operating unit switches to idle mode. Tools are required. PIN code for users is required. Master code, PIN code for the master of the lock is required PIN code for the system manager code (manager code of lock).
  • Page 10: Operating Instructions

    TwinLock B600 CashProtect General Information on This Manual 1.3.3 Operating Instructions Unmarked text following a headline of a paragraph with operating instructions contains information, which may be worth considering before performing the operating procedures described. Such text does not contain safety instructions.
  • Page 11: Safety

    Assembly Instructions, may be performed by skilled electricians only (definition see p. 12), which have been trained and entitled to perform these jobs by INSYS MICROELECTRONICS or approved partner companies. Caution Danger of short circuit of electric components.
  • Page 12: Personnel Requirements

    Make sure all other people are kept off the work area while such jobs are being carried out. Skilled electricians only, which have been instructed about the system by INSYS MICROELECTRONICS or a partner company and have been authorised by one of these companies, may perform jobs, which require the removal of the housing of units of the system or the modification of the hardware configuration.
  • Page 13: System Description

    PIN code and entering OTC (single-use code). With TwinLock B600 CashProtect, extension package RFID is optional. Every system contains an operating unit, at least one lock INSYS Lock and a field bus distributor TwinConnect (small), which connects the components. All systems come with an instruction manual set.
  • Page 14: System Diagrams

    Base System 1.1 consists of an operating unit, with option box RFID, as it may be, with a power adapter outside the protected premises, one INSYS Lock 700, one bus distributor TwinConnect and one blocking unit TwinXT inside the protected premises.
  • Page 15 TwinLock B600 CashProtect System Description Fig. 2: System architecture of system 2.1 1) Two optional switches for both bolt mechanism and release switch The system 2.1 features two locks inside the protected premises. All other components are the same as those of system 1.1.
  • Page 16: Operating Unit Qpad

    Lock INSYS Lock 700 Fig. 5: INSYS Lock 700 With lock INSYS Lock 700, you can lock and unlock the safe / container for valuables. The lock is located inside the protected premises. You can connect up to 2 locks to one system.
  • Page 17: Bus Distributor Twinconnect / Twinconnect Small

    TwinLock B600 CashProtect System Description 3.1.4 Bus Distributor TwinConnect / TwinConnect small Fig. 6: Bus distributor TwinConnect / TwinConnect small Via a redundant bus system, the bus distributor TwinConnect (small) connects the system components with each other. The bus distributor is located inside the protected premises.
  • Page 18: Overview Of The Functions

    TwinLock B600 CashProtect System Description Overview of the Functions 3.2.1 Standard Functions Depending on the kind and the version of system, all or a part of the functions listed incomprehensively on this and the following page can be set before or after the installation.
  • Page 19 TwinLock B600 CashProtect System Description Service functions Protocol with entries of up to 3,000 processes to trace back Im- / export of system configuration via USB System status display / feedback via colouring LED bar Reset of system components Display of versions of components...
  • Page 20: Further Functions (Setting Via Software)

    TwinLock B600 CashProtect System Description 3.2.2 Further Functions (Setting via software) CashProtectPro is an optional PC software not included in the scope of delivery with which parameters of system TwinLock CashProtect can be set. Fig. 9: Start Page PC software CashProtectPro (sample)
  • Page 21 TwinLock B600 CashProtect System Description Time Programs Opening delay adjustable (0-99 min.) Release time adjustable (0-99 min.) 2 weekly programs with specific delays for each day of the week Special days program for blocking / opening for 24h 2 Part lock periods per weekday...
  • Page 22: Optional Functions

    TwinLock B600 CashProtect System Description 3.2.3 Optional Functions The version of the firmware can be displayed via menu Status / Info. See page 44. Some of these functions can be programmed with the optional software CashProtectPro. Integration RFID Available with hardware with RFID module only. Within a network (via TwinNet, for example) as well as locally (via section „Code settings“, field „Code card“...
  • Page 23 TwinLock B600 CashProtect System Description Code Card / Type The RFID type can be specified here. The type has to be available. Range of values: ‘DESFire’, and ‘---’. Setting ex works: ‘DESFire’. Code validity expiration Code validity expiration [months] Setting of the number of months after that user codes become invalid. selecting the option, program asks the users to change their codes.
  • Page 24: Operation

    TwinLock B600 CashProtect Operation Operation With the operating unit, you can set and operate the system. Operating Unit QPad For system TwinLock C/B6X0 CashProtect, there is the membrane keypad version Fig. 10: Control elements of operating unit QPad 1) Keypad with numeric keys and, if required, letter-figures shift...
  • Page 25: Hotkeys

    TwinLock B600 CashProtect Operation Hotkeys In addition to navigating the menus of the display of the operation unit, you can define keys 0-9 of the keys of the operating unit to become ‘hotkeys’ via CashProtectPro. If you press any of these hotkeys immediately after activating the display of the operating unit, the selected menu will be displayed right away.
  • Page 26: The System Status And Mode

    TwinLock B600 CashProtect Operation The System Status and Mode 4.4.1 The System Status System settings can be modified and changed with the system unlocked. Only menus Open, Close and Status / Info are on display on the operating unit with the system locked.
  • Page 27: User- / Personnel Numbers

    TwinLock B600 CashProtect Operation User- / Personnel Numbers Via user matrix of the optional PC software, the system can be configured in such a way that users can enter the personnel number they are used to instead of entering user numbers specific for the system.
  • Page 28: User Groups

    TwinLock B600 CashProtect Operation User Groups Optional with Upgrade / special licence. The users stored at the locks of every system can be divided into two groups: The system manager activates this option via menu „User groups“ of the display of the operating unit.
  • Page 29: Selecting The Master / Cit Master

    TwinLock B600 CashProtect Operation 4.6.2 Selecting the Master / CIT master Lock - and CIT master select ‘Master’ / ‘CIT master’ before entering code: As master / CIT master, follow the steps of an instruction until code input is required.
  • Page 30: Fields And Boxes Of The User Matrix

    ‘Disarm’ is marked for them. Do not unmark box Disarm for users supposed to open locks. This also applies to the lock master. Disarm Enable disarming an optional burglar alarm system (not available with TwinLock B600 CashProtect). Manual V.1.04A...
  • Page 31: Authorisations Ex Works Via Cashprotectpro

    TwinLock B600 CashProtect Operation WP1 – WP2 If boxes are marked, the Weekly Programs selected are assigned to users. These users can open during opening periods defined in the Weekly Programs only. Language Optional user specific language setting, not available Personnel no.
  • Page 32: Authorisation Of Manager / Master / User / Etc

    TwinLock B600 CashProtect Operation 4.7.3 Authorisation of Manager / Master / User / etc. Survey of authorisation of manager (no.225), master (no.00), user (no.01-18), and, as it may be, CIT master / master group 2 (no.18) in the QPad menu structure.
  • Page 33: Menu Structure Of Operating Unit

    TwinLock B600 CashProtect Operation Menu Structure of Operating Unit 4.8.1 Firmware Versions CP25/26 und CQ25/26 (with system open, all menus of all systems) System menu with display Mo 26.07.21 8:35 Open Close Arming (optional) Status / Info Settings – Manager –...
  • Page 34: Pin Codes

    TwinLock B600 CashProtect Operation PIN Codes Caution The system is not protected with ex works versions of system manager – and master code. Danger of unauthorised opening. Due to security reasons, change the default versions of codes as soon as possible.
  • Page 35: Entering Pin Code

    TwinLock B600 CashProtect Operation 4.9.2 Entering PIN Code Depending on the type / configuration of the system, users enter personal PIN / PIN code with the following keys: With locks of VdS class 3 / C with menu keys only. With locks of VdS class 2 / B, optional with numerical keys or with menu keys (setting via PC software / TwinNet).
  • Page 36: 4.10 Rfid Cards

    TwinLock B600 CashProtect Operation 4.10 RFID Cards Optional RFID Cards can be registered by the master only. At every lock, RFID cards can be registered and deregistered for up to 18 users. RFID cards can contain user code, as it may be. Ex works, the card codes for users no.01 – no.18 are inactive.
  • Page 37: 4.11 Opening And Closing

    TwinLock B600 CashProtect Operation 4.11 Opening and Closing Depending on the configuration of the lock system, users enter their user – or their personnel number (“staffnb”) before entering code. Mostly, only one of these options is described within the following sets of instructions.
  • Page 38: Opening A Lock With A Rfid Card

    TwinLock B600 CashProtect Operation 4.11.2 Opening a Lock with a RFID Card Settings Boxes Card, Release, (1 of x), Open locks and, if required, Disarm of the user matrix have been marked for you. The lock master has registered a code card at the lock for you.
  • Page 39: Triggering Silent Alarm When Opening A Lock

    TwinLock B600 CashProtect Operation 4.11.3 Triggering Silent Alarm When Opening a Lock That is an inconspicuous way to send a message calling for help. The alarm cannot be triggered via RFID card. When entering PIN code, trigger the alarm by carrying out the steps listed below.
  • Page 40: Opening A Lock With Dual Code

    TwinLock B600 CashProtect Operation 4.11.4 Opening a Lock with Dual Code Only if both of the two participating users carry out all kinds of authentication assigned to them, the lock will open. Settings The option ‘Dual code (Opening)’ is activated.
  • Page 41: Opening With Unlocking Delay And Release Time

    TwinLock B600 CashProtect Operation 4.11.6 Opening with Unlocking Delay and Release Time This paragraph is a sequel of the last one. Settings See the last paragraph. Additionally, option ‘Release time’ is activated. Perform steps 1-5 of the last paragraph and be prepared to enter code when indicated.
  • Page 42: Closing A Lock

    TwinLock B600 CashProtect Operation 4.11.8 Closing a Lock When the lock locks after having been opened via OTC, a 4-digit return code CIT code: XXXX (optional QR code) is displayed upon the operating unit. This code can be passed on via telephone, for example, and it can be used by the person in charge to end the process.
  • Page 43: Closing A Lock Automatically With The Door Switch

    TwinLock B600 CashProtect Operation 4.11.10 Closing a Lock Automatically with the Door Switch This option can be set via optional PC software. Settings TwinXT or TwinAlarm are connected and activated. On tab ‘Settings’ of CashProtectPro, for example, option ‘Automatic closing with door switch’ is selected. The bolt work switch is not in a position in which it prevents automatic closing.
  • Page 44: Hidden Menu, Status, Network

    TwinLock B600 CashProtect Operation 4.12 Hidden Menu, Status, Network 4.12.1 Displaying the Hidden Menu Certain basic settings can be made or verified via the hidden menu. Every user can display the hidden menu. The system manager code is required for certain settings (language import, setting the time, configuring the alarm devices and the network).
  • Page 45: 4.13 Settings: Manager

    TwinLock B600 CashProtect Operation 4.13 Settings: Manager 4.13.1 Changing the System Manager Code The system manager code of the lock (= system code) does not enable its holder to open the lock, but to configure the system. Currently (07/2021), the changed code is not copied to lock 2 automatically.
  • Page 46: Registering Master Code

    TwinLock B600 CashProtect Operation 4.13.2 Registering Master Code The manager can register master code. The master / holder of the master code can administer users saved within the lock and can register the CIT master. Also see “Registering PIN Code“.
  • Page 47: Deregistering Master Code

    TwinLock B600 CashProtect Operation 4.13.3 Deregistering Master Code The manager can deregister master code. Caution Danger of loss of functions. Possibly users stored at the lock cannot be administered anymore. Make sure there is no loss of functions. Select Manager | Master.
  • Page 48: Setting The Date And The Time Of Day

    TwinLock B600 CashProtect Operation 4.13.5 Setting the Date and the Time of Day All the time-based functions and the correctness of the protocol depend on the proper setting of date and time. Clock change (daylight saving time) in spring and autumn is automatic with this option selected.
  • Page 49: Parallel Code

    TwinLock B600 CashProtect Operation 4.13.7 Parallel Code Optional selection of Parallel code for lock systems with 2 locks (at least). The first user can open lock 1, 2 or 3, the second user opens the other lock or one of the two locks still closed and the third, if required, closes the last lock.
  • Page 50: Alarm Devices: Xt Extension / Twinalarm

    TwinLock B600 CashProtect Operation 4.13.11 Alarm Devices: XT Extension / TwinAlarm Caution Risk that „No release“ is displayed upon an attempt at opening the lock after the activation of the extension unit. After activating the extension unit, both inputs are active.
  • Page 51: Setting Up "Pairing

    TwinLock B600 CashProtect Operation 4.13.12 Setting Up “Pairing” The manager can set up “Pairing”. Also see „Pairing“, page 26 and the manual TwinIP, as it may be. With a system without network, you can set up “pairing” with “00000000” (8 zeros) as notional serial number TwinIP. For a possible update to a system connected to a network, this number must be replaced by the serial number of the unit TwinIP when setting up "Pairing"...
  • Page 52: Setting Up "Code Distribution" (Not With B600)

    TwinLock B600 CashProtect Operation 4.13.13 Setting Up “Code Distribution” (not with B600) Not with B600. With TwinNet 10.3 and higher only. Settings Network connection, TwinIP and pairing set up correctly Unlock the system (open lock 1 or all locks). With > and Enter select Settings.
  • Page 53: Settings: Master

    TwinLock B600 CashProtect Operation 4.14 Settings: Master 4.14.1 Changing the Master Code Holders of the master code of the lock (lock master) can administer the users of the lock and, optionally, they can open the lock. Caution With the master code in ex works version, your system is not protected.
  • Page 54: Registering Pin Code For Users

    TwinLock B600 CashProtect Operation 4.14.2 Registering PIN Code for Users The holder of the master code of the lock (lock master) can register PIN codes. Only masters with right “Service” can assign week programs with PIN code (see below). Users / persons have to be authorised to lock opening with PIN code.
  • Page 55: Registering Cit Master Code

    TwinLock B600 CashProtect Operation 4.14.3 Registering CIT Master Code Only with extra licence / upgrade. Only with option "User groups" about to be selected. Settings Parameter „User groups“ has not been selected yet. The system manager selects that parameter after the master has registered PIN code for user no.
  • Page 56: Deregistering Pin Code For Users

    TwinLock B600 CashProtect Operation 4.14.4 Deregistering PIN Code for Users The holder of the master code (lock master) can deregister PIN codes. With option „User groups | * = YES selected, the CIT master can also do Caution Danger of a configuration error: Opening the lock might become impossible.
  • Page 57: Displaying User Pin Codes

    TwinLock B600 CashProtect Operation 4.14.5 Displaying User PIN Codes The lock master and, as it may be, the CIT master can display for which users PIN codes have been registered. With CIT operation (2 user groups), master and CIT master can administer and display their range of users only.
  • Page 58: Registering Code Cards (Rfid Cards)

    TwinLock B600 CashProtect Operation 4.14.6 Registering Code Cards (RFID Cards) The lock master and, as the case may be, the CIT master, can register code cards for themselves and for other users. In order to be able to use the card to identify themselves, users must be authorised to do so.
  • Page 59: Deregistering User Code Cards

    TwinLock B600 CashProtect Operation 4.14.7 Deregistering User Code Cards The lock master and, as it may be, the CIT master, can deregister code cards TwinCard code access. Even a user authorised to open with card cannot open the lock with a deregistered card.
  • Page 60: Displaying User Code Cards

    TwinLock B600 CashProtect Operation 4.14.8 Displaying User Code Cards The lock master and, as it may be, the CIT master can display for which users cards have been registered. With CIT operation (2 user groups), master and CIT master can display their range of user cards only.
  • Page 61: 4.15 Settings: Employees

    TwinLock B600 CashProtect Operation 4.15 Settings: Employees 4.15.1 Changing User PIN Code All employees / users can change their PIN codes. Settings You have been authorised for opening with PIN code. The lock master has registered PIN code at the lock for you.
  • Page 62: Service

    TwinLock B600 CashProtect Operation 4.16 Service Descriptions of the functions of menu Service. Also see „Menu Structure of Operating Unit“ on page 33. 4.16.1 Reset: Loading the Factory Settings of the Terminal Note: Loading the factory settings deletes the user- and configuration settings.
  • Page 63 TwinLock B600 CashProtect Operation 12. Enter the system manager code again. Serial no. | Please wait is on display. The serial number of the operating unit is saved in the lock. Serial no. | Saved is on display. With more than one locks in the system Serial no. | Lock 2 and Code entry | Manager and Code: are on display.
  • Page 64: Reset: Delete Lock User Codes

    TwinLock B600 CashProtect Operation 4.16.2 Reset: Delete Lock User Codes Note: Deleting the lock codes deletes the user- and the master code. Lock address and manager code remain unchanged. Unlock the system (open lock 1 or all locks). With > and Enter, select Service.
  • Page 65: Motor Step

    TwinLock B600 CashProtect Operation 4.16.3 Motor Step Lock masters can examine the bolt movement by moving the bolt of the lock step by step in both directions with menu Motor step. Note If ‘automatic closing’ is set via optional PC software, the system will close the lock one minute after the end of the motor steps described here.
  • Page 66: Registering A New Lock

    TwinLock B600 CashProtect Operation 4.16.4 Registering a New Lock The system manager can register a new lock in the system or replace an existing lock via menu Regist. new lock. Only new locks that have never been addressed before can be registered via menu Service | Regist.
  • Page 67: Locking The System Despite Defect Bolt Work Contact

    TwinLock B600 CashProtect Operation 4.16.4.2 Changing Locks is the sequel of „Registering a Lock“ in case you replace a lock, but do not extend the system by adding a new lock. Also see „Additional Lock“ above. Follow the steps 1-4 of paragraph „Registering a Lock“.
  • Page 68: Licensing

    TwinLock B600 CashProtect Operation 4.16.6 Licensing This paragraph is about licencing further software like MultiPad Go!, for example. Software licenses are available upon request from your software supplier. Open the system (open lock 1 or all locks, depending on the system).
  • Page 69: 4.17 Import / Export

    TwinLock B600 CashProtect Operation 4.17 Import / Export Options with menu Import / Export. USB is used for im- / export. 4.17.1 Importing Configuration and Language Settings You have manager rights. Take Connection via USB available; see p. 25; port / interface set up via CashProtectPro.
  • Page 70: Messages During Configuration Import

    TwinLock B600 CashProtect Operation 4.17.2 Messages During Configuration Import During the import of a configuration the error messages listed below may be on display in the second display line. The display features two lines. Config. error in the first line indicates that an invalid value has been allotted to a parameter.
  • Page 71: Exporting And Printing Configuration And Protocol

    TwinLock B600 CashProtect Operation 4.17.3 Exporting and Printing configuration and Protocol Settings Boxes Release, Service and PIN code of the user matrix have been marked for you / you have the rights of a master / manager. Take Connection via USB available; see p.25; Set up port / interface via CashProtectPro.
  • Page 72: Selecting A Language

    TwinLock B600 CashProtect Operation 4.17.4 Selecting a Language Every user can choose between three languages in case the languages have been stored within the operating unit before. Press Clear and release the key immediately. Date and time are on display, Mo 26.07.21 15:50, for example.
  • Page 73: Maintenance, Repair And Cleaning

    Observe the bolt work maintenance interval recommended by the manufacturer of the bolt work. Repair tasks are to be performed solely by skilled electricians (see definition on page 12) trained and authorised by INSYS NICROELECTRONICS or partner companies. Caution Danger of short circuit of the electronic components.
  • Page 74: Trouble Shooting

    TwinLock B600 CashProtect Trouble Shooting Trouble Shooting Supplying Power in Case of Power Breakdown Manufacturers of batteries offer fitting 9V block batteries like 6LR61 (alkaline type), 6F22 (zinc-carbon), 6AM6, 522. Take an adapter cable (included in system delivery) and a loaded 9 V block battery.
  • Page 75 TwinLock B600 CashProtect Trouble Shooting Close&Code User has not been authorized to close locks by entering his code. ✓ Consult your system manager. See above. Code card User has not been authorized to use a code card. ✓ Consult your system manager. See above.
  • Page 76 TwinLock B600 CashProtect Trouble Shooting Disarming error TwinAlarm signals an error during disarming the burglar alarm system (BAS): BAS cannot be disarmed because it does not acknowledge being disarmed. ✓ Contact staff with expert knowledge in alarm technology / technical support to have the connection to the BAS checked.
  • Page 77 TwinLock B600 CashProtect Trouble Shooting Error TwinAlarm An error occurred in the communication with TwinAlarm. ✓ Repeat the task you tried to carry out before the message was displayed. Contact technical support if the message is displayed once more. Invalid card The code card is invalid.
  • Page 78 TwinLock B600 CashProtect Trouble Shooting No release! Opening is not possible. Lock has not been enabled via input contact RELEASE of TwinXT / TwinAlarm. ✓ Check whether TwinXT / TwinAlarm are connected properly and whether the lock should be blocked or not. Contact technical support, if the error message is displayed again.
  • Page 79 TwinLock B600 CashProtect Trouble Shooting Trivial code A user has entered code, which contains a row of ascending or descending numbers (12345…/ 76543...). ✓ Such code may be forbidden for security reasons. Enter another code. Was currentless The system has been without power supply. The display of the message ends at the time a lock is opened.
  • Page 80: Support

    TwinLock B600 CashProtect Support Support INSYS MICROELECTRONICS GmbH Hermann-Köhl-Str. 22 93049 Regensburg,, Germany Phone: +49 941 58692 22 Fax: +49 941 58692 45 E-mail: support@insys-locks.de Internet: http://www.insys-locks.com Disposal Dispose of plastic parts, electronic parts and cables by taking them to a certified...
  • Page 81: Glossary

    TwinLock B600 CashProtect Glossary Glossary Terms like Alarm code, printed in bold letters, also are headings of entries of this glossary. In order to make reading easy, only selected terms, which are important in the context they stand, are printed bold. Read the entries for these terms also.
  • Page 82 TwinLock B600 CashProtect Glossary Blocked period / open period (time program) A blocked period is a time span of one day up to a year during which the system cannot be opened. Via software CashProtectPro (optional accessory), you can define up to three blocked periods.
  • Page 83 TwinLock B600 CashProtect Glossary Forced sequence (FS) Possibility of defining the order in which the locks of the system open and close. If you program option ‘Forced sequence’, users have to open lock 1 before they can open lock 2. The system is ‘partly locked’ (which corresponds to state ‘locked’ with option FS deactivated) when lock 1 has been opened.
  • Page 84 TwinLock B600 CashProtect Glossary Pairing As of firmware version 25/26. „Pairing“ is a process ensuring that the communication between (TwinIP,) QPad and the locks takes place encrypted and that these devices cannot be changed without authorisation. Parallel code Option, which can be selected only with systems with at least two locks. The first user to open can open lock 1 or lock 2.
  • Page 85 TwinLock B600 CashProtect Glossary Real-time clock A real-time clock with an alternative energy source provides system date and time, which are sustained even in case of a power failure lasting several days. If the operating unit is separated from power supply for a longer period, it will be necessary to enter the proper date and time after that.
  • Page 86 TwinLock B600 CashProtect Glossary System manager code (=manager code of lock 1) Caution With the system manager code in ex works version, your system is not protected. Change ex works code as soon as possible. Never use series of numbers corresponding with personal data.
  • Page 87 TwinLock B600 CashProtect Glossary - can open with another person of any group (value: „none“). The lock master administers the first group of users (user no.01 - user no.XX-1). The new group of CIT users from user no.XX (= any number between 1 and 17 can be selected) to no.17 is administrated by user no.18, the CIT master.
  • Page 88: Appendix

    Operating unit QPad ..............16 Fig. 4: Operating unit with option box RFID ........... 16 Fig. 5: INSYS Lock 700 ................16 Fig. 6: Bus distributor TwinConnect / TwinConnect small ...... 17 Fig. 7: Blocking device TwinXT / TwinXT small ........17 Fig.
  • Page 89: 10.2 Notes

    TwinLock B600 CashProtect Appendix 10.2 Notes Manual V.1.04A...

Table of Contents