SRS Light Design DSR10 Instruction Manual

10 way dmx splitter

Advertisement

Technical data

Main:
Transformer:
230 V / 50 Hz
Transformer:
110 V / 60 Hz on request
Switching PSU:
89-265V / 50-60Hz on request
Input/ Output:
USITT DMX512
Size:
1U, 19 inch format / 482,5 x 44,5 x 130 mm
Weight:
2,1 kg
Shipment consists of:
DSR10, IEC or PowerCON cable, Printed manual
Warranty:
Lifetime warranty

DECLARATION OF CONFORMITY

According to a guidelines 89/336 EEC and 92/31 EEC:
Name of producer: SRS Light Design s.r.o.
Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic
Declares that the product
Name of product: 10 way DMX splitter
Type: DSR10
Corresponds to the following product specifications:
Safety: EN60065, resp. EN 60950
EMC: EN55103-1, resp. EN55103-2
Additional information:
Unit and all connected apparatus must be earthed via main cable.
th
Bratislava, 10
of may 2009
Robert Sloboda
10 way DMX splitter
Instruction Manual
Model:
DSR10-3 : 3pin DMX connectors
DSR10-5 : 5pin DMX connectors
DSR10-C: various DMX connectors
ATTENTION!
This instruction manual contains important information about the
installation and use of equipment. Please read and follow these
instructions carefully.
Always ensure that the power to equipment is disconnected before
opening the equipment or commencing any maintenance work.
SRS L
SRS Ligh
SRS L
SRS L
ight Design
igh
igh
t Design, Rybničná 36/D , 831 06 Bratislava, Slovakia, tel:+421244681417,
t Design
t Design
fax:+421244681419,
www.srslight.sk
,
sales@srslight.sk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSR10 and is the answer not in the manual?

Questions and answers

Summary of Contents for SRS Light Design DSR10

  • Page 1 Size: 1U, 19 inch format / 482,5 x 44,5 x 130 mm Weight: 2,1 kg 10 way DMX splitter Shipment consists of: DSR10, IEC or PowerCON cable, Printed manual Warranty: Lifetime warranty Instruction Manual DECLARATION OF CONFORMITY Model: According to a guidelines 89/336 EEC and 92/31 EEC: DSR10-3 : 3pin DMX connectors Name of producer: SRS Light Design s.r.o.
  • Page 2 When you connect the DMX cable to device, all LED marked as 2 / 3 or sign of signal Pin 3 Data + polarity goes ON and this indicates that DSR10 is functioning properly and Pin 4, 5 retransmitting the input to the splitted outputs. If there is any LED off check the cable first –...

This manual is also suitable for:

Dsr10-3Dsr10-5

Table of Contents