Table of Contents
Advertisement
Quick Links
iGENT DMX/RS232
Instruction Manual
Model:
iGENT-3
iGENT-5
ATTENTION!
This instruction manual contains important information about the installation and
the use of equipment. Please read and follow these instructions carefully. Always
ensure that the power to equipment is disconnected before opening the
equipment or commencing any maintenance work.
SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic
tel:+421244681417, fax:+421244681419,
converter
www.srslight.com
,
sales@srslight.com
Advertisement
Table of Contents
Related Manuals for SRS Light Design iGENT-3
Summary of Contents for SRS Light Design iGENT-3
- Page 1 Please read and follow these instructions carefully. Always ensure that the power to equipment is disconnected before opening the equipment or commencing any maintenance work. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com...
-
Page 2: Important Safety Information
RX/TX + RTS/CTS RS422 interface: RX line pair TX line pair USB interface: • FTDI with XP/w7/w8 compatibility • Firmware upgrade port • Settings upgrade port SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com... -
Page 3: Front Panel
The device can also be controlled by the W-DMX signal and have the W-DMX Thru out function meaning the DMX signal from the W-DMX is also present on the DMX out connector. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com... - Page 4 Please install the iGENT application. Please start the iGENT application Click File New project and name it: Then save it on local disk: SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
- Page 5 You will see new manufacturer folder there. Here you can add various device per same manufacturer. With right click on New Manufacturer you can add new device and setup communication parameters SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
- Page 6 Click Ok and you will see yellow items – this indicates that settings have not been saved. Please use File>SAVE command to save of details. When project is saved the all data are white. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com...
- Page 7 Function name: Here you can write something about command to know what was programmed. Use maximum of 19 characters. Please click to FILE>SAVE. Now you can see two commands that are programmed. SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com...
- Page 8 How to send config file to HW of iGENT: Click iGENT HW> SEND iGENT and select file /with.bin/ you like to send to the iGENT hardware SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com...
- Page 9 2. Please plug in AC PowerCon cable to iGENT and check if Power LED /green/ is on 3. In IGENT folder locate the: vusb.exe file 4. Run the application Click OPEN and in bottom corner select Firmware files SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
- Page 10 You will see the firmware file link in File: Now press Send: You will see progress bar and the information window will be displayed SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
-
Page 11: Technical Data
Type: iGENT, iGENT-DIN Corresponds to the following product specifications: Safety: EN60065, resp. EN 60950 EMC: EN55103-1, resp. EN55103-2 Bratislava, May 10, 2011 Robert Sloboda SRS Light Design s.r.o, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417, fax:+421244681419, www.srslight.com sales@srslight.com...
Need help?
Do you have a question about the iGENT-3 and is the answer not in the manual?
Questions and answers