Samsung SW70W9 User Manual page 20

installation & maintenance
Adjusting the height of the washer
Make sure your washer is level by adjusting the leveling legs.
Beware of catching your hands under the legs.
1. Pull the handles located at the right and left front of the
washer and slide them off.
2. Adjust the height of the washer upwards or downwards.
3. When you have finished adjusting the height, push the
handles back to fix the adjusting legs in place.
waterdrop mark
Leveling your washer with the leveling screws (Optional)
1. Gently lift up the washer and turn the adjustable legs
to the left to find the optimal balance.
2. When done, return the washer to its original position.
3. After adjusting the legs, do not forget to lock the nut for
safety reasons. (Failing to do so may cause it to become
loose and and move out of position.)
Test run
Make sure that you install your washing machine correctly by running the rinse+spin cycle
after the installation is complete.
20_installation & maintenance
SW70W9XFP-02961E-01_EN.indd 20
cause
The front of the washer Level the washer by adjusting the legs.
is lower
The back of the washer Adjust the height by using the props at the
is lower back.
The left of the washer Adjust the left side by using the adjustable legs
is lower at the front and props at the back.
The right of the washer Adjust the left side by using the adjustable legs
is lower at the front and props at the back.
how to level
2012-12-18 7:09:39