Samsung SW70W9 User Manual page 19

IN CASE OF GENERAL WASHER
1. After pressing the joint ring, insert to the drain hose.
2. After directing the drain hose to a drain, join to the
drainoutlet of the washing machine.
3. Be sure to join them tightly by pressing the joint ring and
pushing it into the drain-outlet.
• The length of drain hose is adjustable so that you can
extend the length appropriately.
HOW TO CHANGE THE DRAIN HOSE DIRECTION
• The handle of joint ring is pressed to pull out the drain hose.
Change the direction of the drain hose and follow the above
guideline again.
CAUTIONS WHEN INSERTING THE DRAIN HOSE
1. Don't exceed more than 3m when the
drain hose is used by connecting with
other hoses.
3. The doorsill shoudn't be more than 5cm. 4. Don't install the drain hose underneath the
SW70W9XFP-02961E-01_EN.indd 19
Less than 3 m
Less than 3 m
Less than
5 cm
drain-outlet
2. Be careful to drain water out at the end of
the drain hose.
wash machine.
installation & maintenance_19
2012-12-18 7:09:37