Advertisement

Quick Links

After reading the instruction manual, please keep it for reference.
Caution
Caution
● This product contains small parts. Keep away from children under 3 years old.
● Keep this product away from small children or infants.
Seek medical attention immediately if any small parts are swallowed.
● Long cord. Strangulation hazard.
● Keep the product away from dusty or humid areas.
● Do not use this product if it has been damaged or modified.
● Do not get this product wet. This may cause an electric shock or malfunction.
● Do not place this product near heat sources or leave under direct sunlight for
 an extended period. Overheating may cause malfunction.
● Do not touch the metal parts of the USB plug.
● Do not apply strong impact or weight on the product.
● Do not pull roughly or bend the cable of the product.
● If product needs cleaning, use only a soft dry cloth.
Do not use any chemical agents like benzene or thinner.
● Do not use this product for anything other than its intended purpose.
 We are not responsible for any accidents or damages in the event of use other than
 the intended purpose.
Since this product is heavy, it may cause injury if dropped.
Parental supervision is suggested when the product is being used by children.
Please keep away from children under 3 years old.
Instruction Manual
Thank you for purchasing this product.
Before using this product, please read the instructions carefully.
Parents/Guardians:
Please read the following information carefully.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPF-013 and is the answer not in the manual?

Questions and answers

Summary of Contents for HORI SPF-013

  • Page 1 Instruction Manual Thank you for purchasing this product. Before using this product, please read the instructions carefully. After reading the instruction manual, please keep it for reference. Caution Parents/Guardians: Caution Please read the following information carefully. ● This product contains small parts. Keep away from children under 3 years old. ●...
  • Page 2: How To Connect

    How to Connect ① Open the housing cover and remove the USB cable. 1) Open up the housing cover by sliding the latch. 2) Open the housing cover and take out 3) Pass the USB cable through the the USB cable. cable hole and close the lid.
  • Page 3: Troubleshooting

    Troubleshooting If this product does not function as desired, please check the following: ① Pushing the PS Button does not turn on the PlayStation®5 console / PlayStation®4 console Due to the specifications of this product, the PlayStation®5 console / PlayStation®4 console will not turn on when the PS Button is pressed.
  • Page 4 Platform PlayStation®5 console, PlayStation®4 console, PC* * PC compatibility not endorsed by Sony Interactive Entertainment. System requirements USB Port, Internet Connection * Functions as PC controller through XInput. This product does not support DirectInput. Before using this product with your PlayStation®5 console or PlayStation®4 console, please read the included instructions carefully.
  • Page 5: Lock Switch

    Use the Function Button to switch profiles (profiles can be set via the HORI Device Manger app). - Please refer to the section "Download App" on the next page for more information on the HORI Device Manager App The Profile LED will change based on Profile setting.
  • Page 6: Download App

    Download App 『HORI Device Manager』 Please download and install the “HORI Device Manager” from this product's website using your PC. URL : https://hori.jp/manual/p5/spf-013/ The following features can be adjusted in the app: ■ D-Pad/ Analog Stick Function ■ Assign Mode ■...
  • Page 7: Cable Wiring Diagram

    When performing maintenance, please refer to the “How to Remove a Button” section and the “Cable Wiring Diagram” as shown below. How to Remove Buttons Push 1) Remove the quick disconnect blade connectors connected to each button. Quick disconnect blade connector - When removing the quick disconnect blade connectors, remove while pressing the area shown in the diagram to the right.
  • Page 8 How to Change the Design ① Open the housing cover, place it on a stable surface, and remove the Option Button buttons (9) shown in the diagram to the right. h Button,j Button,k Button,l Button L1 Button,L2 Button,R1 Button,R2 Button ② As shown in the diagram below, remove the screws (8 screws) and joystick ball top. How to remove the joystick ball top 1)...
  • Page 9: Main Features

    Warranty HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects in material and workmanship for a period of 1 year from the original date of purchase. If the warranty claim cannot be processed through the original retailer please contact HORI customer support directly at info@horiu- sa.com.

Table of Contents