Specifications - Kenwood CS-1022 Instruction Manual

CRT
Acceleration Voltage
Display Area
Type
VERTICAL AXIS
Sensitivity
Attenuator
Input Impedance
Frequency Response
2 mV/div to 5 V/div
1 mV/div
Rise Time
Crosstalk
Operating Modes
Chop Frequency
Channel Polarity
/^Maximum Input voltage
Non-Distorted
Maximum Amplitude
HORIZONTAL AXIS
Operating Mode
Sensitivity
Input Impedance
Frequency Response
AC; 5 Hz to 1 MHz,
X-Y Phase Difference
/^Maximum Input Voltage
SWEEP
Type NORM
AUTO
4

SPECIFICATIONS

CS-1022 CS-1021
150FTM31 150GTM31A
or 150UTM31
6 kV 2 kV
CH1 and CH2
12 steps, 1 mV/div to 5 V/div in 1-2-5 sequence.
Vernier control for fully adjustable sensitivity between steps.
1 MO ± 2 % , approx. 35pF
DC; DC to 20 MHz,
- 3 dB
AC; 5 Hz to 20 MHz,
- 3 dB
DC; DC to 10 MHz,
- 3 dB
AC; 5 Hz to 10 MHz,
- 3 dB
17.5 nsec or less
(20 MHz)
35 nsec or less
(10 MHz)
— 40 dB minimum
CH1; single trace
CH2; single trace
ADD; CH1+CH2 added display
ALT; two waveforms alternating
CHOP; two waveforms chopped
Approx. 250 kHz
Normal or inverted, CH2 only inverted
More than 8 div, More than 5 div,
DC to 20 MHz DC to 20 MHz
(input thru CH2, x 10 MAG not included)
With TRIG MODE switch, X-Y
operation is selectable.
CH1; Y axis
CH2; X axis
Same as vertical axis (CH2)
Same as vertical axis (CH2)
DC; DC to 1 MHz,
- 3 dB
- 3 dB
3° or less at 100 kHz
Same as vertical axis (CH2)
CS-1012
150GTM31A
2 kV
8 x 1 0 div (1 div= 10 mm)
Rectangular, with internal graticule
1 mV/div to 5 V/div, ± 3 %
DC; DC to 10 MHz,
- 3
dB
AC; 5 Hz to 10 MHz,
- 3
dB
DC; DC to 7 MHz,
- 3
dB
AC; 5 Hz to 7 MHz,
- 3
dB
35 nsec or less
(10 MHz)
50 nsec or less
(7 MHz)
500 Vp-p or 250 V (DC + AC peak)
More than 6 div,
DC to 10 MHz
DC; DC to 500 kHz,
- 3 dB
AC; 5 Hz to 500 kHz,
- 3 dB
3° or less at 50 kHz
Triggering sweep
Sweep free runs in absence of trigger
CS-1020 CS-1010
150FTM31 150GTM31A
6 kV
2 kV
-
1 MQ ±2%, approx. 32pF 1 Mfi ±2%, approx. 35pF
DC; DC to 20 MHz, DC; DC to 10 MHz,
- 3
- 3
dB
dB
AC; 5 Hz to 20 MHz,
AC; 5 Hz to 10 MHz,
- 3
- 3
dB
dB
DC; DC to 10 MHz,
DC; DC to 7 MHz,
- 3 - 3
dB dB
AC; 5 Hz to 10 MHz, AC; 5 Hz to 7 MHz,
- 3
dB - 3
dB
17.5 nsec or less 35 nsec or less
(20 MHz) (10 MHz)
35 nsec or less
50 nsec or less
(10 MHz)
(7 MHz)
-
-
-
-
More than 8 div,
More than 6 div,
DC to 20 MHz DC to 10 MHz
( x 10 MAG not included)
With TRIG MODE switch, X-Y
operation is selectable.
VERT. INPUT; Y axis
EXT TRIG INPUT; X axis
100 mV/div
1 MQ ± 2 % ,
1 Mfi ± 2 % ,
approx. 32pF approx. 35 pF
DC; DC to 1 MHz, DC; DC to 500 kHz,
- 3 dB - 3 dB
3° or less at 100 kHz 3° or less at 50 kHz
50 V (DC + AC peak)