Download Print this page
Seconique PINK GLOSS Assembly Instructions Manual

Seconique PINK GLOSS Assembly Instructions Manual

Jasper 2 door 2 drawer wardrobe

Advertisement

Quick Links

JASPER 2 DOOR 2 DRAWER WARDROBE
ASSEMBLY INSTRUCTIONS
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
Please ensure all fi ttings and parts are present before commencing with assembly.
Never drag or push products as this could cause damage to the joints making it inferior.
We strongly recommend that you keep children away from your work area.
Assemble this product as close to its fi nal position as possible.
Do not place this product next to a radiator or in direct sunlight.
Do not drag or push items across your high gloss furniture as this may cause the surface to scratch.
Wood is a natural product and may expand if subjected to damp and may shrink or crack if subjected to heat.
Therefore it is recommended that room temperature is maintained, with no sudden temperature fl uctuations.
Make sure any spillage is wiped off immediately.
Do not place hot or chilled items directly on to the surface, use a place mat or marking will occur.
For general cleaning use a soft cotton or micro fi bre cloth, and do not use detergents of any kind.
From time to time it may be necessary to tighten fi ttings, regular inspections should be carried out.
Do not place on a wet or damp fl oor as staining may occur to your fl oor.
PINK GLOSS
IMPORTANT
FOR DOMESTIC USE ONLY
SEC/AY/12/20/HN3
_ _ _ _ _HN
_ _ _ _ _HN
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PINK GLOSS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seconique PINK GLOSS

  • Page 1 SEC/AY/12/20/HN3 JASPER 2 DOOR 2 DRAWER WARDROBE _ _ _ _ _HN _ _ _ _ _HN PINK GLOSS ASSEMBLY INSTRUCTIONS IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
  • Page 2 SEC/AY/12/20/HN3 ITM/D236- *Use of power tools to assemble this product will invalidate *Please check contents and read the instructions before commencing assembly. any claim and damage this product making it unsafe!!! *Assemble this product following the enclosed instructions carefully. *Please assemble on a clean soft suface to avoid damage. *Please take care to avoid damaging panels during assembly.
  • Page 3: Fittings List

    SEC/AY/12/20/HN3 ITM/D236- FITTINGS LIST Flat Head Screw Flat Head Screw Flan Head Screw Flan Head Screw O 4,5x50mm O 3,5x40mm O 3,0x20mm O 3,5x25mm Flat Head Screw Flat Head Screw Flan Head Screw O 3,5x12mm O 3,5x10mm O 3,0x16mm Dowel O 5x25mm Back Panel Strip Cylindrical Nut Tack 10x10mm...
  • Page 4: Pre-Assembly

    SEC/AY/12/20/HN3 ITM/D236- Pre-Assembly Flan Head Screw Dowel O 5x25mm O 3,5x12mm Cylindrical Nut Metalic Support Glue Detail 2 Detail 2 Detail 1 Detail 1 Detail 11 Detail 11 Detail 1 Detail 1 Detail 2 Detail 2 Detail 1 Detail 1 Detail 2 Detail 1 Detail 11...
  • Page 5 SEC/AY/12/20/HN3 ITM/D236- Pre-Assembly Flat Head Screw Drawer Runners O 3,5x10mm Dowel O 5x25mm Hanging Rail Support Glue Shelf Support Detail 1 Detail 6 Detail 6 Detail 12 Detail 4 Detail 4 Detail 12 SECOND HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE Detail 4 Detail 6...
  • Page 6 SEC/AY/12/20/HN3 Pre-Assembly ITM/D236- Dowel O 5x25mm Glue Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1...
  • Page 7 SEC/AY/12/20/HN3 Pre-Assembly ITM/D236- Flan Head Screw Flat Head Screw O 3,5x12mm O 3,5x10mm Dowel O 5x25mm Tack 10x10mm Cylindrical Nut Plastic Foot 12x15mm Hanging Rail Support Glue 5 mm Hinge Plate Detail 5 Detail 25 Detail 12 Detail 5 Detail 1 Detail 3 Detail 3 Detail 3...
  • Page 8 SEC/AY/12/20/HN3 Pre-Assembly ITM/D236- Flat Head Screw Flan Head Screw O 3,5x10mm Dowel O 5x25mm O 3,5x12mm Tack 10x10mm Cylindrical Nut Plastic Foot 12x15mm Drawer Runners 5mm Hinge Plate Hanging Rail Support Glue Shelf Support Detail 4 Detail 4 Detail 3 Detail 5 Detail 3 Detail 3...
  • Page 9 SEC/AY/12/20/HN3 ITM/D236- Flan Head Screw O 3,5x12mm Glue Detail 1 Detail 11 Detail 11 Detail 1 Detail 11...
  • Page 10 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw O 3,5x40mm Glue Hole Plugs Detail 24 Detail 1 Detail 1 Detail 14 Detail 24 Detail 1...
  • Page 11 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw Flat Head Screw O 4,5x50mm O 3,5x40mm Glue Hole Plugs Detail 1 Detail 1 Detail 1 Detail 13 Detail 1 Detail 24 Detail 13 Detail 1 Detail 1 Detail 13 Detail 24...
  • Page 12 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw Flat Head Screw Flan Head Screw O 4,5x50mm O 3,5x40mm O 3,5x12mm Glue Hole Plugs Detail 24 Detail 1 Detail 1 Detail 1 Detail 24 Detail 1 Detail 11 Detail 24 Detail 1 Detail 13 Detail 1 Detail 11 Detail 1...
  • Page 13 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw O 4,5x50mm Glue Hole Plugs Detail 14 Detail 14 Detail 1 Detail 21 Detail 14 Detail 1 Detail 14 Detail 1 Detail 1 Detail 14 Detail 21...
  • Page 14 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw O 3,5x10mm Back Panel Strip Tack 10x10mm For your future reference order number should be here Detail 16 Detail 17 Detail 16 Detail 17...
  • Page 15 SEC/AY/12/20/HN3 Pre-Assembly ITM/D236- Flan Head Screw O 3,5x12mm Hinge Detail 7 Detail 7 Detail 7 Detail 7 Detail 7 Detail 7 Detail 7...
  • Page 16 SEC/AY/12/20/HN3 ITM/D236- Detail 8 Flan Head Screw O 3,5x25mm Handle Hanging Rail Detail 19 Detail 18 Detail 18 Detail 19 Detail 19 Detail 8 Detail 8 Detail 19 ADJUSTMENTS Depth Adjustment Height Adjustment Internal Adjustment...
  • Page 17 SEC/AY/12/20/HN3 Pre-Assembly ITM/D236- Flat Head Screw O 3,5x10mm Dowel O 5x25mm Glue Metal support 4 holes Detail 26 Detail 26 Detail 1 Detail 1 Detail 26 Detail 1...
  • Page 18 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw Glue O 3,5x10mm Detail 27 1° Detail 1 Detail 27 Detail 1 2° Detail 1 Detail 27 Detail 1 Detail 27 Detail 1 Detail 27...
  • Page 19 SEC/AY/12/20/HN3 ITM/D236- Flat Head Screw Drawer Runners O 3,0x16mm Tack 10x10mm 4° Detail 22 3° Detail 23 Detail 22 Detail 23 Detail 23 THIRD HOLE THIRD HOLE Detail 23 Detail 22...
  • Page 20 SEC/AY/12/20/HN3 ITM/D236- Detail 8 Flan Head Screw O 3,5x25mm Handle 5° Hole Plugs Detail 21...
  • Page 21 SEC/AY/12/20/HN3 ITM/D236- WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fi xed to the wall. Wall fi xings are not supplied with this product as different wall materials require different types of fi...
  • Page 22: Care And Maintenance

    SEC/AY/12/20/HN3 JASPER 3 DRAWER CHEST _ _ _ _ _HN _ _ _ _ _HN PINK GLOSS ASSEMBLY INSTRUCTIONS IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
  • Page 23 SEC/AY/12/20/HN3 ITM/D723- *Use of power tools to assemble this product will invalidate *Please check contents and read the instructions before commencing assembly. any claim and damage this product making it unsafe!!! *Assemble this product following the enclosed instructions carefully. *Please assemble on a clean soft suface to avoid damage. *Please take care to avoid damaging panels during assembly.
  • Page 24: Fittings List

    SEC/AY/12/20/HN3 ITM/D723- FITTINGS LIST Flat Head Screw Flan Head Screw Flat Head Screw Flan Head Screw O 3,5x40mm O 3,5x25mm O 4,5x50mm O 3,0x20mm Flat Head Screw Flat Head Screw Strap O 3,5x10mm Dowel O 5x25mm O 3,0x16mm Glue Hole Plugs Tack 10x10mm Cylindrical nut Cam Nut O 12mm...
  • Page 25 SEC/AY/12/20/HN3 ITM/D723- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Drawer Runners Tack 10x10mm Plastic Foot 12x15mm Cam Bolt Detail 3 Glue Detail 1 Detail 2 Detail 2 Detail 2 Detail 3 Detail 1 Detail 15 Detail 15 Detail 15 Detail 15 SECOND HOLE LAST FOURTH HOLE...
  • Page 26 SEC/AY/12/20/HN3 ITM/D723- Pre-Assembly Dowel O 5x25mm Glue Cylindrical nut Detail 4 Detail 1 Detail 4 Detail 4 Detail 1 Detail 1 Detail 4 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 4...
  • Page 27 SEC/AY/12/20/HN3 ITM/D723- Flat Head Screw Flat Head Screw O 4,5x50mm O 3,5x40mm Glue Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 6 Detail 1 Detail 7...
  • Page 28 SEC/AY/12/20/HN3 ITM/D723- Cam Nut O 12mm Detail 16 Detail 1 Detail 16 Detail 1 Detail 16 Detail 1 Detail 16...
  • Page 29 SEC/AY/12/20/HN3 ITM/D723- Flat Head Screw O 3,5x10mm Tack 10x10mm Back Panel Strip For your future reference order number should be here Detail 10 Detail 11 Detail 10 Detail 11...
  • Page 30 SEC/AY/12/20/HN3 ITM/D723- Pre-Assembly Flat Head Screw Dowel O 5x25mm O 3,5x10mm Glue Metal support 4 holes Detail 18 Detail 1 Detail 18 Detail 1 Detail 1 Detail 1 Detail 1 Detail 18...
  • Page 31 SEC/AY/12/20/HN3 ITM/D723- Flat Head Screw O 3,5x10mm Glue Detail 19 1° Detail 19 Detail 1 Detail 1 2° Detail 1 Detail 19 Detail 1 Detail 19 Detail 1 Detail 19...
  • Page 32 SEC/AY/12/20/HN3 ITM/D723- Flat Head Screw Drawer Runners O 3,0x16mm Tack 10x10mm Detail 13 3° 4° Detail 14 Detail 13 Detail 14 Detail 14 THIRD HOLE THIRD HOLE Detail 13 Detail 14...
  • Page 33 SEC/AY/12/20/HN3 ITM/D723- Detail 5 Flan Head Screw O 3,5x25mm Handle 5° Detail 8 Hole Plugs...
  • Page 34 SEC/AY/12/20/HN3 ITM/D723- WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fi xed to the wall. Wall fi xings are not supplied with this product as different wall materials require different types of fi...
  • Page 35 SEC/AY/12/20/HN3 JASPER 2 DRAWER BEDSIDE _ _ _ _ _HN _ _ _ _ _HN PINK GLOSS ASSEMBLY INSTRUCTIONS IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
  • Page 36: Parts List

    SEC/AY/12/20/HN3 ITM/D11- *Use of power tools to assemble this product will invalidate *Please check contents and read the instructions before commencing assembly. any claim and damage this product making it unsafe!!! *Assemble this product following the enclosed instructions carefully. *Please assemble on a clean soft suface to avoid damage. *Please take care to avoid damaging panels during assembly.
  • Page 37 SEC/AY/12/20/HN3 ITM/D11- FITTINGS LIST Flat Head Screw Flat Head Screw Flan Head Screw Flat Head Screw O 4,5x50mm O 3,5x10mm O 3,5x25mm O 3,0x16mm Dowel O 5x25mm Cam Nut O 12mm Cylindrical Nut Cam Bolt Glue Drawer Runners Tack 10x10mm Plastic Foot 12x15mm Handle Hole Plugs...
  • Page 38 SEC/AY/12/20/HN3 ITM/D11- Pre-Assembly Flat Head Screw Dowel O 5x25mm Glue Drawer Runners O 3,5x10mm Tack 10x10mm Plastic Foot 12x15mm Detail 3 Detail 3 Detail 1 Detail 2 Detail 2 Detail 3 Detail 3 Detail 1 SECOND HOLE LAST FOURTH HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) Detail 3 Detail 2...
  • Page 39 SEC/AY/12/20/HN3 ITM/D11- Pre-Assembly Dowel O 5x25mm Glue Cam Bolt Cylindrical nut Detail 6 Detail 6 Detail 1 Detail 1 Detail 6 Detail 6 Detail 1 Detail 1 Detail 4 Detail 4 Detail 4 Detail 4 Detail 1 Detail 4 Detail 6...
  • Page 40 SEC/AY/12/20/HN3 ITM/D11- Flat Head Screw O 4,5x50mm Glue Detail 1 Detail 1 Detail 1 Detail 1 Detail 8...
  • Page 41 SEC/AY/12/20/HN3 ITM/D11- Cam Nut O 12mm Glue Detail 5 Detail 5 Detail 1 Detail 1 Detail 5 Detail 1 Detail 5...
  • Page 42 SEC/AY/12/20/HN3 ITM/D11- For your future reference Tack 10x10mm order number should be here Detail 10 Detail 10...
  • Page 43 SEC/AY/12/20/HN3 ITM/D11- Pre-Assembly Flat Head Screw Dowel O 5x25mm Glue O 3,5x10mm Metal support 4 holes Detail 15 Detail 15 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 15...
  • Page 44 SEC/AY/12/20/HN3 ITM/D11- Flat Head Screw O 3,5x10mm Glue Detail 16 1° Detail 1 Detail 16 Detail 1 2° Detail 1 Detail 16 Detail 1 Detail 16 Detail 1 Detail 16...
  • Page 45 SEC/AY/12/20/HN3 ITM/D11- Flat Head Screw O 3,0x16mm Drawer Runners Tack 10x10mm 4° Detail 12 3° Detail 13 Detail 12 Detail 13 Detail 13 THIRD HOLE THIRD HOLE Detail 12 Detail 13...
  • Page 46 SEC/AY/12/20/HN3 ITM/D11- Flan Head Screw O 3,5x25mm Handle 5° Detail 7 Hole Plugs Detail 14...