Page 1
VESA Adapter Assembly instructions The VESA adapter is compatible with the following Dell products (dell.com): S2419HM, S2719DM, S2719DC. With the VESA adapter, you can easily mount your DELL brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2
First, mount the stand of your Dell monitor. Remove the 2 screws at the bottom. (Figure 1) Figure 1 Step 2 Now plug the 3idee VESA adapter onto the mount on the monitor. (Figure 2) Note: Please note the marking above / below! Figure 2...
Page 3
Assembly instructions Step 4 Now you can hold the monitor with one hand and attach it to your VESA arm with the other hand by tightening the 4 screws from behind. (Figure 4) Figure 4 Step 5 Please check again if all screws are tightened properly. (Figure 5) Figure 5...
Page 4
We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...