Advertisement
TEAR DROP 1 PIN OWNERS MANUAL
A.
Lay the pilot chute out net side up so the edge of the circle is at the mouth of the
spandex pocket. S-Fold the bridle line on the half of the pilot chute over the
pocket.
B.
Fold the pilot chute in half over the bridle line. (see FIGURE #2) then bring
the corners up to form a wide triangle. (see FIGURE #3).
C.
Fold the triangle in half, forming a skinny triangle. (see FIGURE #4).
D.
Fold the triangle into thirds, forming a skinny triangle, then fold it once more.
(see again FIGURE #4).
E.
Fold the pilot chute in half so that the handle is even with the skirt.
(see FIGURE #5)
F.
Then stow the pilot chute into the spandex pocket with the toggle showing at the
top
.
FIGURE #2
FIGURE #4
INSTALLATION & ATTACHMENT OF RETRACTABLE PILOT CHUTE
Thomas Defence Systems Ltd, Issue 5, 01-05-2014, Reference Number TSE/004
FIGURE #3
FIGURE #5
8
Advertisement
