Advertisement
TEAR DROP 1 PIN OWNERS MANUAL
When lifting the TEAR DROP 1 PIN, hold the main lift web between the large harness
ring and the chest strap. Put the rig on as you would a jacket, setting the yoke across the
shoulders. Step through the leg straps, being sure they are not twisted, then thread the
chest strap through its friction adapter and tighten it appropriately. Be sure it has NOT
been threaded through the reserve ripcord handle. Tighten the leg straps, then put the
free ends of the straps down the leg pads or in the elastic keepers. It is important to
secure these free ends; a loose end can easily be mistaken for a deployment handle.
REPLACEMENT PARTS
Thomas Defence Systems supplies original compatible replacement parts for the Tear
Drop 1 Pin. When ordering parts, include the serial number and date of manufacture
of your Tear Drop 1 Pin so that the correct part/component can be quickly supplied.
The serial number and date of manufacture information can be found on the
manufacturing label on the front of the left hand rear reserve riser.
Thomas Defence Systems Ltd, Issue 5, 01-05-2014, Reference Number TSE/004
28
Advertisement
