Advertisement
TEAR DROP 1 PIN OWNERS MANUAL
M.
FIGURE #14 shows the 1 pin loop coming out of the top of the reserve pilot
chute with the pull-up cord in place.
N.
FIGURE #15 shows the pull-up cord coming back through the center of the
reserve pilot chute and through the 'T' bar.
O.
FIGURE #16 shows the reserve pilot chute now seated on top of the reserve
container.
P.
FIGURE #17 shows the TEAR DROP 1 PIN in the upright position with one
hand on the top of the domed reserve pilot chute cap, the other on the 'T' bar.
Slowly pull the 'T' bar through the reserve container bringing the pull-up cord
and loop with it.
FIGURE #14
FIGURE #16
Preparation of the reserve pilot chute and closing the reserve container
Thomas Defence Systems Ltd, Issue 5, 01-05-2014, Reference Number TSE/004
PACKING A SQUARE RESERVE
FIGURE #15
FIGURE #17
17
Advertisement
