4-in-1 Multi-Purpose
Siren/Strobe
Installation Manual
Model
Product
SH-816S-BMQ
Siren/Message/PA
SH-816S-SMQ/x* Siren/Strobe/Message/PA
*Replace "x" with the first letter of the lens color, amber, blue, clear, or red.
The ENFORCER 4-in-1 Multi-Purpose Siren/Strobe is multiple communication and signaling
devices in one: siren, internal message, broadcast, and (SH-816S-SMQ only) an LED strobe. It can
connect to an external source to serve as a public address system in daily use. Depending on
circumstances or application it can also sound a warning siren, playback your pre-recorded
message or custom sound from internal memory, and/or be used as a PA broadcast system. The
SH-816S-SMQ strobe is available with either amber, blue, clear, or red lenses.
• Multiple devices in one – siren/strobe, internal custom emergency message, and PA system
• Multiple notification types – strobe, siren, or audio (pre-recorded or broadcast)
• Multiple audio sources – siren, on-board MP3/WAV, external public address (PA) system
• Upload your own warning message (MP3 or WAV format, up to 2MB) via micro-USB port
• 9~15 VDC and low current draw
• 2 Alarm inputs – input 1 triggers 115dB siren, input 2 overrides input 1 to play custom message
• 20W Speaker for PA broadcast input (input not to exceed 2V, broadcast interrupts both alarms)
• Built-in tamper alarm output
• Weatherproof for outdoor/indoor use, IP65
Mount
Surface or back box (single-gang, double-gang, C-type)
Surface or back box (single-gang, double-gang, C-type)
SH-816S-SMQ/R shown