Table of Contents
Advertisement
10
MAINTENANCE
All international, national and regional guidelines, standards, safety instructions and safety regula-
tions must be observed throughout the entire life cycle of the product.
The system distributor must be installed so that it is accessible for the necessary maintenance.
Danger to life due to electric shock when using tools
After opening the housing, the system distributor is only finger and back-of-hand safe.
Always follow the safety regulations.
DANGE R
In general, all national and international specifications, standards and guidelines must be observed
and applied. This also applies to the use of aids such as lifting platforms or ladders.
WARNING
Use only a slightly damp cloth to clean the system distributor. Do not use any cleaning agents.
Any maintenance work must only be carried out by qualified personnel.
Tampering with the system distributor
The CE declaration only refers to the original model of the system distributor. If components are re-
placed, identical components according to the parts list must be used, otherwise the warranty will
be void.
•
NOTE
Replacing components with similar or other components voids the warranty as well as the CE dec-
laration and thus the operating license of the system distributor. The professional who carried out
the modification is responsible for issuing a new CE declaration in accordance with the standards
and directives applicable at that time.
•
Changes to the system distributor render this manual invalid. The specialist who made the change
is responsible for updating or creating a new manual.
Wieland Electric GmbH | BA001281 | 04/2022 (Rev. A)
Maintenance
23
Advertisement
Table of Contents
