Table of Contents
Advertisement
Commissioning
8 COMMISSIONING
All international, national and regional guidelines, standards, safety instructions and safety regula-
tions must be observed throughout the entire life cycle of the product.
The commissioning of the components is the exclusive responsibility of skilled personnel. The le-
gally binding and valid regulations for electrical installations must be observed.
The distributor is fully functional once it has been mounted and installed correctly. It may be neces-
sary to reset e.g. the switching and protective devices. If necessary, carry out a functional test of the
switching and protective elements.
System distributors with electronic components may require commissioning and configuration. The
necessary manuals are enclosed with the system distributor and can be found on the manufactur-
er's homepage.
During installation and commissioning, you must make sure that the necessary EMC directives are
complied with.
For further details on the mechanical or electrical data, see the enclosed documentation in the
scope of delivery or at
https://eshop.wieland-electric.com
Wieland Electric GmbH | BA001281 | 04/2022 (Rev. A)
20
Advertisement
Table of Contents
