Installation And Adjustment - Haier XPB50-LS User Manual

Air bubble twin-tub washing machine with pump
Hide thumbs Also See for XPB50-LS:
Table of Contents

Advertisement

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
incomplete drainage.
2.Do not tramp or press the drain hose.
3 If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
4.If extra drain hose is needed , please make
separate purchase. The inner diameter of the
extra hose shall not less than 30mm, and the
length shall not exceed 1.5m.
If the extra hose is too long, cut it either
at point A or B.
Install the lint filter
After opening the package,pllease take out the lint filter from
After opening the package,pllease take out the lint filter from
the document bag,install it to the overflow filter of the wash
the document bag,install it to the overflow filter of the wash
tub.See to the figure.
tub.See to the figure.
Before Using
Before Using
<10cm
> 30mm
<1.5m
A
B
Overflow filter
Lint filter

Advertisement

Table of Contents
loading

Table of Contents