Fig. 28: Fitting The Bellows; Table 29: Tightening Torques (Filter Silencer Screws) - ABB HT844414 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.3 Disassembly and assembly of the
filter silencer casing
Screws for fastening the individual parts to
the filter silencer
M10
30 Nm
Table 29: Tightening torques (filter silencer screws)
Tighten all screws of the bottom parts (01) and (02).
u
Tighten all screws of the side parts (03, 04, 07, 08) and the flanges (10, 11).
u
Tighten all screws of the circumferential parts (05, 06, 09).
u
Bellows
Fig. 28: Fitting the bellows
Fit bellows (C) with frame (F), screws (S) and nuts (N) on the filter silencer casing.
u
© Copyright 2018 ABB. All rights reserved.
Screws for fastening the individual parts
HZTL4034_EN
M8
25 Nm
Revision N November 2018