Fitting The Filter Silencer With Noise Package; Fig. 61: Fitting The Filter Silencer With Noise Package; Table 44: Tightening Torques (72004, 74043) - ABB HT844414 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly / 8.15 Fitting the filter silencer with noise
package
8.15

Fitting the filter silencer with noise package

The following work steps apply to both the welded and cast versions of the filter silencer.
Before fitting ensure that the individual sealing segments of the gasket (81301) and the gas-
ket (74042) are not damaged and that the contact surfaces are clean.
Fig. 61: Fitting the filter silencer with noise package
Part number A165-L
72004 M14
130 Nm
72043 M10
45 Nm
Table 44: Tightening torques (72004, 74043)
© Copyright 2018 ABB. All rights reserved.
A170-L A175-L
M16 M18
200 Nm 300 Nm
M10 M10
45 Nm 45 Nm
HZTL4034_EN
A180-L A185-L
M20 M22
420 Nm 570 Nm
M10 M10
45 Nm 45 Nm
Revision N
A190-L
M24
710 Nm
M10
45 Nm
November 2018