Philips SignageSolutions BDL3230QL User Manual page 35

Local KB lock: Choose to enable or disable the keyboard (control
buttons) function of the display
RC lock: Choose to enable or disable the button function of the remote
control.
Monitor Group: Adjust the group range between 1 to 255. The default
setting is 1
Monitor ID: Adjust the ID number for controlling the display via the
RS232C connection. Each display must have a ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255. The Default setting is 1.
L. Click on Network Setting to switch to Network Setting Page.
Host Name: In the multiple-display connection, you can rename each
display for easy identification.
DHCP: Choose how this display should assign address to the network
resource. (On: DHCP & Auto IP, Off: Static IP). If DHCP is set to On,
device will request and be assigned an address every time it's booted
up. Otherwise, you need to ask your network administrator for the
appropriate IP settings.
M. Click on System information to switch to System information Page.
Getting the display information. Such as Serial number, running time and
Temperature via the RS232/Network.
Note:
1. Some browser issues may be caused by the browser itself. For optimal
viewing and security we recommend that you keep your browser up to
date.
2. We recommend that you use IE for optimal performance with Web
Control.
27
BDL3230QL