Related Manuals for Philips 24PHS4304
Summary of Contents for Philips 24PHS4304
- Page 1 Register your product and get support at 4304 series www.philips.com/TVsupport User Manual 24PHS4304...
-
Page 2: Table Of Contents
Contents 12.3 End of Use 1 Get Support 13 Specifications 1.1 Identify and Register your TV 1.2 TV Help and User Manual 13.1 Power 1.3 On-line Help and User Manual 13.2 Reception 1.4 Consumer Care / Repair 13.3 Display Resolution 13.4 Display Input Resolution 2 Software 13.5 Sound... -
Page 3: Get Support
On-line Help and User Manual To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/TVsupport. -
Page 4: Software
Look for OAD updates (Over-the-air Software Download) Scan to search for an Over-the-air software update. (Home) > Settings > Update software > Look Update Software for OAD updates. * The availability of OAD updates is dependent on Search for Updates your country. -
Page 5: Quick Guide
Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2. -
Page 6: Ir Sensor
5. BACK To switch back to the previous channel you selected. IR sensor To close a menu without changing a setting. EXIT The TV can receive commands from a remote control To switch back to watching TV. that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point ... - Page 7 through the list of sources, including the tuner selection. The menu will disappear automatically.
-
Page 8: Setting Up
Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com. - 32PHx450x - VESA MIS-F 100, M6 (Minimum 10 Use the model number of the TV to look for mm, Maximum 14 mm) the Quick Start Guide to download. -
Page 9: Turn On Tv
the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. - Page 10 For 22"/24" Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Switch On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
-
Page 11: Connections
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. -
Page 12: Video Device
that prevents copying content from a DVD disc or Blu- ray Disc. Also referred to as DRM (Digital Rights Management). HDMI - DVI If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. -
Page 13: Audio Device
(Home) > Settings > General settings > EasyLink > EasyLink > On Audio Device Operate HDMI CEC-compatible devices with TV HDMI ARC remote control Only HDMI 1 on the TV have HDMI ARC (Audio (Home) > Settings > General Return Channel). -
Page 14: Computer
Headphones VGA (if available) You can connect a set of headphones to Use a VGA cable if your device only has a VGA the connection on the side of the TV. The connection. Use VGA connection and add an Audio connection is a mini-jack 3.5mm. -
Page 15: Usb Device
Contact a digital TV operator for more information on Watch Channel on Smart Card terms & conditions. You can watch channels which are installed from CI/CAM cards. 1. While watching a TV channel, press LIST to open the channel list. 2. -
Page 16: Wired Network - Freeview (Network Port Is Only For Uk Models)
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. Make the connection Warning To make a wired connection… The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another 1. -
Page 17: Switch Source
Switch Source Source List - To open the sources menu, press SOURCES . - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press ... -
Page 18: Channels
installlation > Search for channels > Update channels Channels Re-install all channels (Home) > Settings > Antenna/cable About Channels and Switch installlation > Search for channels > Re-install Channels channels 1. Select the country where you are now and To watch TV channels press OK. - Page 19 Symbol rate mode with and and change the number If your cable provider did not give you a with and . To check the frequency, specific symbol rate value to install the TV channels, select Search and press OK. leave the Symbol rate mode setting on Automatic.
- Page 20 installation. This will speed up the installation. Satellite (if available) • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select About Installing Satellites Unicable for 1 or for 2 satellites at the start of the installation.
- Page 21 new channels. Satellite Channel List - Polarisation - Select the polarisation you need. (Home) > Settings > Satellite installlation > - Symbol rate mode - Select Manual to enter symbol Satellite channel list rate. You can select your preferred satellite channel list - Frequency - Enter the frequency for the when press ...
- Page 22 With Channel list copy, you can copy the channels > Channel list copy > Copy to TV and press OK. installed on one TV onto another Philips TV of the Enter your PIN code if necessary. same range. With Channel list copy, you avoid the 4.
-
Page 23: Channel List
Subtitles Status To switch on Subtitles, press SUBTITLE. Select Status to view technical information on the channel. You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. Clock Automatic Display time on the corner of the TV screen. If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show... -
Page 24: Select Channel Filter
- Press (green) key to enter with upper-case Create or Edit Favourites Channel List - Press (yellow) key to enter number and symbol LIST > OPTIONS > Create favourites list - Press (blue) key to delete a character Select a channel then press OK to add in a 4. - Page 25 2. Select Antenna - Favourite channels , Cable - 3. Press a colour key to select a colour-coded subject Favourite channels or Satellite - Favourite channels*, at the bottom of the screen. and press OK. Text sub-pages 3. Press OPTIONS , and select Reorder channels. A Text page number can hold several subpages.
- Page 26 5. Press (left) repeatedly if necessary, to close the menu.
-
Page 27: Tv Guide
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ... - Page 28 Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
-
Page 29: Recording And Pause Tv
reformatting for use with a computer. Recording and Note: Recording function is only for digital TV broadcast. It is not possible to record content from external Pause TV devices (e.g. HDMI). What You Need Recording If you connect a USB Hard Drive, you can pause or What You Need record digital TV broadcasts (DVB broadcasts or similar). -
Page 30: Pause Tv
To record a programme… With the USB Hard Drive connected and formatted, the TV continuously stores the TV broadcast you are 1. Press TV GUIDE. watching. When you switch to another channel, the 2. On the TV guide, select the channel and broadcast of the former channel is cleared. -
Page 31: Videos, Photos And Music
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions 10.1 Set the transition from one picture to the next. From a USB Connection Slideshow frequency Select the display time for each photo. -
Page 32: Music
2. Select USB Flash Drive and press (right) to Music Options select the USB device you need. 3. Select Videos and select one of video, you Options for playing music... can press OK to play the selected video or press ... -
Page 33: Open Tv Setting Menus
11.3 Quick Settings and All Open TV Setting Settings Menus Quick settings menu: 11.1 Press SETUP key on the remote control to find Home Menu Overview frequently used settings in Quick settings menu. - Picture style: Select one of preset picture styles for Press ... - Page 34 - Movie - Ideal for watching movies Adjust the colour enhancement - Game - Ideal for gaming (Home) > Settings > Picture > Advanced > Colour > Colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright You can adjust and stored picture settings in in the colours.
- Page 35 Screen Edges Gamma (Home) > Settings > Picture > Format and edges > Picture format > Screen edges (Home) > Settings > Picture > Advanced > Contrast > Gamma With Screen edges, you can slightly enlarge the picture to hide distorted edges. Press the arrows ...
- Page 36 volume of a connected headphone separately. Clear Sound (Home) > Settings > Sound > Advanced > Clear sound Surround Sound Select On to improve the sound for speech. Ideal for (Home) > Settings > Sound > Surround mode news programmes.
- Page 37 the sound of the TV picture. CAM Operator Profile You can set the value in steps of 5ms. Maximum setting is 60ms. (Home) > Settings > General settings > CAM Operator Profile To switch on operator profile for CI+/CAM for easy channel installation and updates.
- Page 38 Redo full TV installation , and set TV status back to Clock the first time you switch on (Home) > Settings > Region and (Home) > Settings > General language > Clock settings > Reinstall TV Enter PIN code and select Yes, the TV will reinstall completely.
- Page 39 the current code use 8888 and enter a new code. Universal Access Settings (Home) > Settings > Universal access Lock for Programme With Universal Access switched on, the TV is (Home) > Settings > Child lock > Parental prepared for use for the deaf, hard of hearing, blind or partially sighted people.
-
Page 40: Environmental
1 year. You can also find the power consumption values for this product on the Philips website for your country When this crossed-out wheeled bin symbol is www.philips.com/TVsupport attached to a product it means that the product is covered by the European Directive 2012/19/EU. -
Page 41: Specifications
- 24PHx43x4 : 60 cm / 24 inch Product specifications are subject to change without notice. For more specification details of this product, Display resolution www.philips.com/TVsupport - PHx43x4: 1366x768 Power - Mains power : AC 220-240V +/-10% 4504, 4503 series TV - Ambient temperature : 5°C to 35°C... -
Page 42: Sound
Computer formats 4503, 5503 series TV Resolutions (amongst others) - Output power (RMS) : 32" - 10W, 43" - 16W - 640 x 480p - 60 Hz - Dolby Audio - 800 x 600p - 60 Hz - DTS 2.0+ Digital out ™ - 1024 x 768p - 60 Hz - 1280 x 768p - 60 Hz - 1360 x 768p - 60 Hz... - Page 43 - AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack - SCART (RGB/CVBS): SCART adaptor - TV ANTENNA: 75 ohm coaxial (IEC) - Network LAN - RJ45 (for Freeview HD)* TV Side - CI: Common Interface - USB - Headphones: Stereo 3.5mm mini-jack * Network port is only for UK models 4504, 4503, 5503 series TV For 32PHS4504, 32PHS4503, 43PFS5503...
-
Page 44: Troubleshooting
Settings > Help > User manual to find Philips startup screen the information you are looking for. When the TV is in standby, a Philips startup screen is If the User manual doesn't answer your question, you displayed, then the TV returns to standby mode. This can go to the support website of Philips. -
Page 45: Channels
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country. -
Page 46: Usb
behaviour is normal. 14.8 Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV. -
Page 47: Safety And Care
TV to the wall or a suitable support. Contact Philips TV Consumer Care to have the TV - Teach children about the dangers of climbing on checked before use. -
Page 48: Screen Care
Errors The condensation moisture will not harm the TV or reported to Philips will be adapted and published on cause malfunction. the Philips support website as soon as possible. Terms of warranty - Risk of injury, damage to TV or void of warranty! 15.2... - Page 49 products. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
-
Page 50: Copyrights
16.4 Other Trademarks Copyrights All other registered and unregistered trademarks are 16.1 the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 51: Open Source
Source: http://www.denx.de/wiki/U-Boot Open Source vmlinux (3.1.10) 17.1 linux kernel Open Source Software Source: http://git.kernel.org/cgit/linux/kernel/git/stable/linux- This television contains open source software. TP stable.git Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source busybox (v1.23.2) software packages used in this product for which such offer is requested by the respective licences. - Page 52 freetype (2.5.3) openssl-0.9.8 (1.0.0) FreeType is a freely available software library to OpenSSL is a robust, commercial-grade, and full- render fonts. featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols. Source: http://www.freetype.org/license.html Source: http://www.openssl.org/source/license.html libc (2.16) sqlite (3.7.11) The GNU C Library is used as the C library in the GNU systems and most systems with the Linux kernel.
- Page 53 icu (4.2.1) ICU is a mature, widely used set of C/C++ and Java libraries providing Unicode and Globalization support for software applications. Source: http://site.icu-project.org/home pixman (0.19.6) Pixman is a low-level software library for pixel manipulation, providing features such as image compositing and trapezoid rasterization.
-
Page 54: Index
On-line User Manual 3 CI Card 14 Optical 13 Colour 34 Colour Enhancement 34 Colour Settings 34 Philips Support 3 Colour Temperature 34 Picture Clean 35 Computer Connection 14 Picture Contrast Mode 34 Computer Picture Setting 34 Picture Format 35... - Page 55 Speakers or Headphones 39 Standby Mode 10 Subtitle Language 38 Super Resolution 35 Surround Sound 36 Switching On 10 Teletext 25 Text 25 Text Language 38 Time 38 Time Settings 38 Time Zone 38 Troubleshooting 44 TV placement 8 Universal Access 39 Update Satellite Channels 20 Update Software 4 Update Software - Local Updates 4...