Related Manuals for Woodson WPIM-60
Summary of Contents for Woodson WPIM-60
- Page 1 Instruction Manual Pie/Food Display Models: WPIM-60 A guide to the use, care and maintenance of your quality Woodson product...
-
Page 2: Table Of Contents
Your New Woodson Product Thank you for choosing this quality Woodson product. All our products are designed and made to meet the needs of food service professionals. By using, caring and maintaining your product according to these instructions, your Woodson product should give you many years of reliable service. -
Page 3: Compliance
Compliance At the time of manufacture Woodson products are designed and made to comply with all relevant Australian Standards. General precautions Every person who is to operate this machine must read this manual or obtain suitable training prior to use. -
Page 4: Contents & Packaging
Contents and packaging Woodson pack your product to limit any possible damage caused as a result of transportation. Please unwrap the box carefully, and do not discard any packaging without checking to ensure you have the following items: One pie/food display, including shelves and sliding doors (two pair) & crumb tray •... -
Page 5: Operating Instructions
Operating Instruction Every person who is to operate this machine must read this manual or obtain suitable training prior to use. Remove all packing, plastic coating and tape from the glass and stainless steel before installing the machine. These units are designed mainly for the holding of warm pastries including pies, sausage rolls and other similar foodstuffs. -
Page 6: Maintenance & Cleaning
Maintenance & Cleaning Maintenance To clean externally use warm soapy water and a damp, soft cloth or sponge (always • make sure the unit is unplugged) Always ensure the power cable is not pushed against the hot part of the food •... -
Page 7: Troubleshooting
This light is only accessible by the removal of a safety cover plate. This area of the pie warmer should only be accessed by qualified technicians Specifications Model WPIM-60 Power 240 Volts source Power... -
Page 8: Safety
If the electrical cables, plug or other connections show any signs of physical damage or wear do not use the machine. In such instances contact Woodson for details of your local repair agents (see page 2). We also recommend regular testing of machine by a trained and qualified technician to ensure it is working effectively and safely. -
Page 9: Appendix 1 - Australian Warranty And Importer/Distributor Contact Details
Appendix 1 – Australian Warranty and Importer/Distributor Contact Details As the exclusive manufacturer and distributor of Woodson products in Australia, Stoddart Manufacturing (Stoddart) would like to congratulate you on your purchase of a Woodson product. It should be noted by users of the product that it is not designed for household or domestic use and should not be used for this purpose. - Page 10 replacement or refund for a Major Failure and compensation for any other reasonably foreseeable loss or damage. Customer is entitled to have the equipment repaired, or replaced if the equipment fails to be of an Acceptable Quality and that failure does not amount to a Major Failure. Warranty Clarification Customer acknowledges and agrees: A Major Failure occurs when the equipment suffers repeated and/or unexpected...
- Page 11 Any consequential loss, damage or expense arising directly or indirectly from use of the equipment otherwise than in accordance with the Instructions; Any damage or malfunction arising from, or relating to, Customer's failure to properly maintain or clean the equipment in accordance with the Instructions; Damage caused to equipment during transportation, which is outside Stoddart's standard delivery conditions.
- Page 12 AUTHORISATION NUMBER and details of work to be carried out by a Stoddart authorised service agent. This authorisation number MUST be obtained before any work is carried out. Stoddart will not accept invoices for work carried out without an official authorisation number or by an unauthorised service agent. Customer must quote the official authorisation number on all correspondence and invoices relating to a warranty claim to ensure prompt processing by Stoddart.
- Page 13 WARRANTY REQUEST FORM (07) 3440 7600 Int: +617 3440 7600 Phone: Phone: 1300 307 289 (07) 3344 1000 Int: +617 3344 1000 Fax: Email: service@stoddart.com.au To ensure we can provide the best possible service we require you to complete this form. Make, model and serial number, along with other essential information.
Need help?
Do you have a question about the WPIM-60 and is the answer not in the manual?
Questions and answers