Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Safety Cover Complete and Bearing Box Section (cont.)
ASSEMBLING
1) Assemble Bearing box section by doing the reverse of the disassembling steps, and install it on the machine.
(Fig. 8 on page 4)
Note: Before assembling Helical gear 23 to Spindle, make sure that O ring 26 is installed on Bearing box
as illustrated to right in Fig. 12 on page 5.
2) Assemble Safety cover complete to the machine.
Note 1: Be sure to assemble two Spacers to Safety cover complete as illustrated in Fig. 13.
Note 2: Do not forget to assemble Thickness ring to Bearing box. (Fig. 14)
Note 3: When linking Safety cover complete to Blade case with Tension spring 3, hook each end of Tension spring 3
as illustrated in Fig. 15.
Fig. 13
Safety cover complete
Spacer
Spacer
Fig. 15
Hook this end of Tension spring 3 through
the hole in Blade case from Blade side.
Hook this end of Tension spring 3 through the hole
in Safety cover complete from gear housing side.
Spacers assembled correctly
to Safety cover complete
Blade side
Fig. 14
Bearing box section
Thickness ring
Apply machine oil to the outer surface of
Thickness ring for smooth movement of
Safety cover complete.
Blade case
Tension spring 3
Safety cover complete
P 6 /13
Gear housing side
Advertisement
