Advertisement
R
epair
CAUTION: Remove the battery, SAW BLADE from the machine for safety
before repair/ maintenance !
[1] NECESSARY REPAIRING TOOLS
Code No.
1R027
Bearing setting pipe 18-10.2
1R028
Bearing setting pipe 20-12.2
1R031
Bearing setting pipe 28-20.2
1R032
Bearing setting plate 8.2
1R037
Bearing setting plate 20.2
1R263
Bearing extractor (2 pcs)
1R269
Bearing extractor
1R278
Round bar for arbor 4-50
1R281
Round bar for arbor 7-50
1R291
Retaining ring S and R pliers
1R316
Wrench for bearing retainer
1R356
Bearing plate
[2] LUBRICATION
Apply the following grease to protect parts and product from unusual abrasion:
Makita grease N. No.2 to the following portions designated with the black triangle
Machine oil to the following portions designated with the gray triangle
Item No.
Description
19
Handle R
51
Thickness ring
Fig. 1
Safety cover complete
Description
10mm
(for arbor press)
3g to the gear room for Helical gear 23 and Helical gear 15
3g to the gear room located on the opposite side for Helical gear 35
and Pinion gear of Armature shaft
Surface that contacts Safety cover complete
Helical gear 23
51
Assembling Ball bearing 6900ZZ and Helical gear 15 to Gear shaft
Assembling Helical gear 35 to Gear shaft
Supporting Bearing box section when removing Helical gear 23,
Sleeve 10, and Ball bearing 6900ZZ from Spindle
Supporting Gear shaft when assembling Helical gear 35,
Ball bearing 6900ZZ and Helical gear 15 to Gear shaft
Removing Helical gear 35, Ball bearing 6900ZZ and Helical gear 15
from Gear shaft
Removing Bearing box section
Removing Ball bearing 604ZZ and 696ZZ
Removing Ball bearing 604ZZ
Removing Helical gear 15 and Ball bearing 6900ZZ
Removing/installing Retaining ring
Removing/installing Bearing retainer 14-23
Removing Ball bearing 604ZZ
Portion to lubricate
19
Use for
(viewed from the opposite side)
19
Helical gear 15
Helical gear 35
P 2 /13
Lubricant
Advertisement
