Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
1) Remove Blade cover (transparent part) by unscrewing Tapping screw 4x12. (Fig. 2)
2) Remove Rubber sleeve 6 and Sleeve 4 by unscrewing Tapping screw 4x25. (Fig. 3)
Fig. 2
Tapping screw 4x12
Blade cover
(transparent)
3) Remove the following 5 parts from Flat head square neck bolt M6x75: Stop ring E-8, Lever 40, Hex nut M6,
Flat washer 6, Pipe 6. Swivel Safety cover and pull off the bolt. Remove Pan head screw M5 while fixing
Hex nut M5-8 with Wrench 8. (Fig. 4) Base can now be separated from the machine. (Fig. 5)
Fig. 4
Handle and Motor housing
viewed from Motor housing side
Safety cover comp.
Hex lock nut M5-8
Pan head screw M5
For easy removal of Hex nut M6, loosen Hex nut M6
using Lever 40 as a wrench before removing Lever 40.
Flat head square neck bolt M6x75
Pipe 6
Flat washer 6
Hex nut M6
Lever 40
Stop ring E-8
Fig. 3
Rubber sleeve 6
Sleeve 4
Fig. 5
Base
Flat head square neck bolt M6x75
P 3 /13
Tapping screw 4x25
Pan head screw M5
Advertisement
