Table of Contents
Advertisement
VT-16P250WS / VT-24P370WS: 16 / 24 Port L2 Web Smart Ethernet PoE Switch
Link/Act LED:
Green (for megabit ports): Indicates that the port is running at 100M.
Green (for gigabit ports): Indicates that the port is running at 1000M.
Blinking: Indicates that the switch is either sending or receiving data to the port.
Light off: No link.
PoE LED:
Green: Indicates the PoE powered device (PD) is connected and the port supplies power successfully.
Light off: Indicates no powered device (PD) connected.
Reset: By pressing the Reset button for 5 seconds the switch will change back to the default configuration and all
changes will be lost.
2.3 Rear Panel
The rear panel view of the switch consists of an AC power connector, Power Switch and Fuse.
3
Hardware Installation
3.1 Package contents
Package contents include the following:
PoE Switch: 16x10/100 PoE ports with 2x10/100/1000 combo ports Ethernet Switch
n
AC power cord
n
Two (2) rack-mount ears and Six (6) screws
n
Four (4) adhesive-backed rubber feet
n
User's manual
n
IMPORTANT: If any piece is missing or damaged, please contact your local dealer or reseller for service.
3.2 Switch Installation
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the device must be attached on the
bottom at each corner of the device's base. Allow enough ventilation space between the device and the objects
around it.
Note:
Do not press on the switch. Any pressure more than 9lbs may cause damage to switch.
Rack Installation
3
Advertisement
Table of Contents
