VT-16P250WS / VT-24P370WS: 16 / 24 Port L2 Web Smart Ethernet PoE Switch
6.2 Administrator
Administrator -> Authentication Configuration
Here you can enter a new Username/Password and confirm it.
The factory default
IP address: 192.168.2.1
Username: admin
Password: system
Administrator -> System IP Configuration
There are two ways for the switch to obtain an IP address: Static and DHCP (Dynamic Host Configuration Protocol).
When using static mode, the IP address, Subnet Mask and Gateway can be manually configured. When using
DHCP mode, the Switch will first look for a DHCP server to provide it with an IP address (including network mask
and default gateway) before using the default or previously entered settings. By default the IP setting is static mode
9