Vixen Horns VXS4006 Installation Manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the entire instruction guide before getting started with the installation. Professional installation is
recommended for this product.

CONTENTS

 12V Motor Driven Electric Siren (Grey)
The specific voltage requirement for this siren is 12 volt DC. Therefore installation must be done
with a DC power source of 12 volts.

SAFETY INSTRUCTIONS

 This product produces a very loud sound. Hearing loss or permanent damage may result from improper use.
 Do not operate in a closed environment or near pedestrians.
 Do not connect the siren to any power source other than that specified above.

MOUNTING

 Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of
the vehicle so as to provide a firm platform which will help protect the siren from damage due to excessive
shaking. Do not attach the siren to any plastic or other flexible material.
 Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a
drill.
 Attach the siren to the vehicle using two screws (not provided).
 Adjust the vertical angle of the siren using the two screws on each side.
PAGE 1 of 2
VXS4006
INSTALLATION GUIDE